Coil spring bow (not your usual case, guarantee you will be stumped)

[Heavyopp]

And don't forget the thread thats over in OEM....

 

[Green XJ Jeep]

What should i measure to see ahout this though? Ive taken countless measurements and everything checks out! Its driving me nuts.

Sent from my Moto G (5S) Plus using Tapatalk

A trip to an alignment shop will tell if the caster and camber are correct which will help in diagnosing a bent or twisted tube.

 

[anthrax323]

Is the spring seated correctly in the lower perch/bucket? The tail of the spring should sit nicely into a channel, allowing the retainer to be tightened down.

 

[Boostwerks.com]

If you look at your lower bump pad relative to your bump tower, it's fairly obvious what's going on. If you don't have a spun or bent axle tube (which should be pretty easy to rule out), your axle isn't centered.

Do you have side pictures of your rig? What about wheel base measurements?

 

[burntkat]

Looks like the passenger side tube is spun to me. Put a angle finder on the flat part of the coil seat on each side. Should be obvious in short order.

 

[tonis506]

Passenger tube spun, control arm mounts bent or control arm is bent. My money is on the axle tube.