Ecomike
NAXJA# 2091
- Location
- MilkyWay Galaxy
I was seeing some light brown to yellow stuff that looked like water induced rust. That added to the clean pistons made me think of steam cleaned pistons. I guess the gas could have done it too. Hard to say which it was for sure.
I would be a little worried about bearings now. If I were you, I would drop the oil pan, clean and inspect the oil pump, screen, and crank bearings, replace the lower end pan gaskets and CS main seals. Might even check the cylinder walls on those 2 washed cylinders!
Do it before the JY gets any more time past the warranty issue. Hang on to those pics, you might need them later!
I would be a little worried about bearings now. If I were you, I would drop the oil pan, clean and inspect the oil pump, screen, and crank bearings, replace the lower end pan gaskets and CS main seals. Might even check the cylinder walls on those 2 washed cylinders!
Do it before the JY gets any more time past the warranty issue. Hang on to those pics, you might need them later!