ruggedjeep
NAXJA Forum User
- Location
- Sherman Oaks
Big Bear 9-17 *report and pics*
- Thread starter ruggedjeep
- Start date
- Location
- Westminster, SoCal
That UCA mount on the axle end looks nice 
When I was putting the new D30 (new to me) under the jeep I laid a bead on the inside of the mount as well as I put a strap across the back to the axle.
When I was putting the new D30 (new to me) under the jeep I laid a bead on the inside of the mount as well as I put a strap across the back to the axle.
ruggedjeep
NAXJA Forum User
- Location
- Sherman Oaks
I was the one taking the pics :wave: and you could be right.. i was running around while snapping pics so that could be the problem. Nope no damage on the Dshaft of the toy other some scrapes. Its was resting on the beefy part of the yoke.IMORTL said:
Remi: I will hopefully go to a buddys shop later today or tomarrow to get it re welded, as it is my DD. Its held on by a small weld in the back,which made it driveable, i will make sure it gets welded everywhere possible.
FELIX
Who Knows, Ask Who
- Location
- Camarillo, CA
Nice Pic's We were up there the same day, running John Bull. Couldn't ask for better weather. There were alot of groups in the area, & ran in to a few, or should I say they ran into us :nosmile:
Looks like you had a godd time like us.
Rob
Looks like you had a godd time like us.
Rob
ruggedjeep
NAXJA Forum User
- Location
- Sherman Oaks
Did anybody from your group lose a memory card for a Sony digi cam on john bull? if so i have it.FELIX said:
FELIX
Who Knows, Ask Who
- Location
- Camarillo, CA
ruggedjeep said:
I"ll ask & see.
Thanks
Rob
FELIX
Who Knows, Ask Who
- Location
- Camarillo, CA
Posted on our group board, no replies so I'm guessing no.
Thanks for asking though. Are you going to the M & G in Oxnard on Sat? If so I'll see you there.
Rob
Thanks for asking though. Are you going to the M & G in Oxnard on Sat? If so I'll see you there.
Rob
