Running a 95 HO that for all purposes is new. 500 miles on the long block, all new sensors, new CCV, fresh radiator, etc. Where I messed up is with the injectors - I put in 21lb Accel and didn't take into account the lower PSI rating, that coupled with the Banks header / hi-flow cat and muffler have it running lean (white plugs and O2 sensor) and way too hot - especially at idle.
So after comparing the cost of new injectors, an adjustable fuel pressure regulator, and an adjustable map sensor, I built the adjustable map sensor.
Can anyone with experience suggest a starting voltage? I'll head in this month for emissions testing - they do an idle test, and a 2500 RPM test - what would be ideal readings?
So after comparing the cost of new injectors, an adjustable fuel pressure regulator, and an adjustable map sensor, I built the adjustable map sensor.
Can anyone with experience suggest a starting voltage? I'll head in this month for emissions testing - they do an idle test, and a 2500 RPM test - what would be ideal readings?