91 4.0 5 speed

[wickedwillys62]

selling this for a buddy he wants some cash to finish his cj7, 91 xj 4.0, ax15, 3.55 gears, 8.25 rear it has about 4" of lift and around 168,000 miles, only rust on on the drivers lower door ut runs great but needs a slave and a fly wheel had new cluth and pressure plate, also need a upper control arm bushing other than that this jeep is in great shape never been wheeled

$1,000

located in thorndale pa

 

[wickedwillys62]

Also interested in trades

 

[dukie564]

unless the axles or tranny have been swapped in place of the originals it would have 3.07 gears

 

[HKB3]

How does the fuse box look? Any brake fluid leaking on it from the clutch slave cylinder?

 

[wickedwillys62]

Yes the axles were swapped from an auto the original rear was a Trudy5

I will ask it'd been a while since I checked it out

 

[wickedwillys62]

Last. I knew the fuse box wss fine

 

[wickedwillys62]

The slave does not apear to be leaking

 

[Maurice]

Vacuum disconnect?

HO? (seems like it, double-checking)

Is it still internal slave?

Why does it need a flywheel/slave? Clutch slipping?

Any pictures of the underside?

Thanks

 

[wickedwillys62]

No didco

Yes HO

Still internal slave

The clutch hooks up great but it engages right off the floor then when its a full runing temp you loose the ability to dissiangage the clutch like someone cut it to much and the slave cant push far enofe im not sure why he thinks the slave is bad we replaced the hole clutch kit just not the fly wheel

 

[wickedwillys62]

Sold