89 Comanche shell with 4.56 gears-$200

[BIGSLVRXJ]

Alright guys, here's the deal. I bought a Comanche a few months ago and I ended up losing interest in it and started on another project. It has been gutted and it is about 75% of the way prepped for a 97+ dash. The engine bay has been repainted "Grabber Green". Here's the best part, it has a 4.56 Dana 30 (disconnect) under it and I also have a set of 4.56s that would go into the rear D35. I know the 35 isn't that strong, but this would be perfect for a bigger street driver MJ or you could just buy rear gears later if you decide to swap axles. Looking to get $200 out of the shell with the gears.
So here is a list of the usable parts on the Comanche...

97+ driver's side fender
Dana 30 disconnect axle with 4.56s
Dana 35 that has 3.55s right now
Dana 35 4.56s (uninstalled)
Comanche OBD-I (High Output) Fuel pump (uninstalled)
Comanche shell (bed is complete with tailgate and taillights, missing tailgate handle though)
It also has the "super rare" Comanche factory cargo light that illuminates the bed
Stock coils
Stock leaf packs
Gas tank
Rear bumper is "decent"
Oh and it's got a CLEAR Iowa title that is up-to-date

It also has a 4.0 Litre from a 1997 XJ with 114,000 miles in it right now that I will let go for an additional $150-it ran great when pulled a couple months ago.

This is 90% of the rust

If you think you're really interested in it, I'll upload more pictures. The kicker is I would really like this thing gone by Thursday or Friday. It will also need a set of tires to get up on the trailer. I typed this post in a hurry, if you need clarification on anything post up, or you can call me for more info at 515-314-3184 too.

Thanks,
Collin

 

[jakeWI]

I am very interested in it. Could you post more pictures. The only thing is, im not sure on the Thursday, Friday thing.

 

[jakeWI]

if you want to, you could pm me as well.

 

[89eliminator]

is that a shortbed or longbed?

 

[BIGSLVRXJ]

is that a shortbed or longbed?

It's an 89 Eliminator SWB




I forgot the LCAs in the fifth picture down do go with the Comanche but the coils do not

Let me know if you're still interested JakeWI.

 

[jakeWI]

I am interested but I need to check and see if i can borrow truck and trailer. I will let you know. I am just not sure on this thursday/friday if thats a problem?

 

[BIGSLVRXJ]

The Comanche is actually sold, a guy just came to pick it up locally. Sorry about that Jake.

 

[jakeWI]

ok. no problem. glad ya sold it.