30/ 44 axles

[aparke4]

not all info is listed but u get the gist

going full width like i should have a long time ago!

built 30/ 44 combo out of an XJ

will take payment plans!

the 30
yukon super joints
yukon chromo axle shafts inners and outer - one needs to be serviced have not looked yet though to see what deal is
rustys 30 truss/ brace
lunchbox locker - aussie or lockright can not remember
4.56 gears with syn oil
alloy usa outer seals
complete WJ steering - knuckles, JKS spacers, drilled drilled rotors, calipers
HD heim steering with hydro assist mount
JKS mini lower control arm sliders - welded on
JKS OTA mount
ARB diff cover
and more...

44

avalnache engineering truss
recent brake work and bearing replaced
4.56 gears
superlift diff cover
full detroit locker - syn diff oil
stock 30 spline shafts

both axles have spidertrax spacers 5 on 4.5 BP

can also make super combo deal with 90% tread goodyear MTR and black 15x10 steelies that will bolt right up!

I have a price in mind but I like making deals so lemme know what u are thinking

these will bolt in to an XJ or TJ with work to front and coil buckets on rear

pm me or email

[email protected]

can make deal for already built rear axle plus cash - 14b or 60 spool or locker and geared @ 5.13 or there abouts

 

[PacificEd]

Please list a price as per forum rules.

4. FS/Wanted posts shall include price in the post. Do not post a 'feeler' thread. If you are unsure on whether or not to sell an item, please post in a different forum that is applicable to that discussion. This forum is not it.

If the OP is unsure on what would be a fair price or "market value" price for an item, the OP should post 'obo' or something similar. This will ensure that the terms of the sale are clear from the beginning. While this has not been an issue at this time, we want to make sure it will not become an issue in the future.

 

[southernrebel20]

what do you want for the 44, I have one now that needs to be geared, but this one is better set up already. Let me know.

 

[aparke4]

price - start at 2000

I am currently in MS @ school so axle would need to be picked up or shipped

i have seem 44's go from 450 - 900 but i do not have aftermarket shafts in this one but i forgot it has JKS shock relocation mounts at axle tube height

like i said i am looking for offers in that range I guess - pm me and lets talk

 

[aparke4]

Please list a price as per forum rules.

4. FS/Wanted posts shall include price in the post. Do not post a 'feeler' thread. If you are unsure on whether or not to sell an item, please post in a different forum that is applicable to that discussion. This forum is not it.

If the OP is unsure on what would be a fair price or "market value" price for an item, the OP should post 'obo' or something similar. This will ensure that the terms of the sale are clear from the beginning. While this has not been an issue at this time, we want to make sure it will not become an issue in the future.

my bad thanks!

2100 obo - lets deal

 

[redneck]

If only I had money...

 

[aparke4]

will do payment plan for members! seriously...

 

[ChuckstrPT]

Aaron...that's a deal dude.......locked front and rear....why don't you make him an offer, and include the 8.8 you've got sitting in your shop!:dunno:
It's only money...you're young...not married...no kids....come on dude...don't let them get away

 

[aparke4]

I am looking at going full width so a 9 inch 44 combo - 60-70- 14 bolt would be more for what i am getting after... anyways I would like to help a fellow jeeper out

oh and tie rod has ballistic tube clamp - adjustable - for hydro assist and ram mounts at axle side

 

[aparke4]

tires are 37 1250 15 inch radials - set of 5 on 15x10 steel black rims that are in like new shape - tires have little wear and some rock scuff but are 90% good to go

 

[ChuckstrPT]

tires are 37 1250 15 inch radials - set of 5 on 15x10 steel black rims that are in like new shape - tires have little wear and some rock scuff but are 90% good to go

Aaron....THAT's a real deal with 5 tires??? You just need a little more lift to fit 'em! Cut those fenders!
Man, If I hadn't spent 2 weeks putting in a similar set of axles...We'd be talkin' right now:wave1:

 

[aparke4]

ya I finally got a spot to work/ build jeep so it is time! I have had nothing but good deals and help service on this site so that is why it is a feeler - I know how much time and $ i have sourcing sourcing parts so whoever gets it will be pleased

 

[redneck]

How hard will it be to set the steering up without hydro assist? Sending PM...

 

[aparke4]

not hard at all! it all will bolt right up - WJ knuckles already accept bolts for heims (they were drilled some i think) so all that is left is to drill pitman arm which is not too bad - when I did mine the metal was pretty soft if you have a good bit...

 

[redneck]

PM sent

 

[ChuckstrPT]

PM sent

You Go Boy! I'll bring the doughnuts!:cheers:
Where ya at Randy......:twak:

 

[redneck]

You're a terrible influence Andy! :confused1 Making me spend money I dont have... :twak: :looser: :laugh: I need to sell that 8.8 and that set of 245 MT/R's in the shop now to help finance this. :doh:

 

[601cherokee]

These axles are sweet. I've wheeled with Aparke before, and his rig goes alot of crazy places I dare not travel. If I had the cheddar, and the need, I'd jump on this deal!!!

 

[ChuckstrPT]

Did someone say Cheddar ?:eyes:

 

[DrRandy]

You're a terrible influence Andy! :confused1 Making me spend money I dont have... :twak: :looser: :laugh: I need to sell that 8.8 and that set of 245 MT/R's in the shop now to help finance this. :doh:

Did someone say....big money!!