(2) PSC rams 1.5"x8 and 1.75"x 7.5"

blondejoncherokee

blondejoncherokee

NAXJA Member
Location
sacramento
2 PSC rams. basically new. I am getting charged restocking fees, so I figure ill pass on the savings to a member at a low price.

Both rams are basically brand new. The 1.5x8" is pretty much brand new. just mocked up and thats it, I think it had some royal purple in it for a day, maybe not , I cant remember, whereas the 1.75x7.5" was ran one direction to prairie city road on a dead end trip.


1.5" -132$ OBO (paid like 180$ shipped?)

1.75x7.5 - 220$ OBO (paid 265$ shipped)

I am going to get raped on return shipping and restocking fees so might as well try this out first

-Jonathan
 
alright I am going to return these if no one wants them. You will pay a lot more for yours and these are brand new (one has one run to PC road one way)
 
I have surplus center RAM lines for 10$ each or the PSC DIY kit for 50$.
 
blondejoncherokee said:
2 PSC rams.

1.5" x8" -100$ (paid like 180$ shipped?)

1.75x7.5 - 160$ (paid 265$ shipped)


Price Change since I really really don't wan to ship these back and suffer the extra shipping costs and 20% restocking fees. Im taking a huge hit regardless.

-
Click to expand...
 
both sides have adjustable heims, these are so much better than the surplus center rams its crazy. These are very legit. Ill text pics and post pics later.
 
Hey Jon. Don't return them just yet. I need to see if they will work for what I have planned.
Bob
 
smokinlib1 said:
Hey Jon. Don't return them just yet. I need to see if they will work for what I have planned.
Bob
Click to expand...

OK. Jake is first in line for the 8", the 1.75x 7.5" is like perfect for almost any dana 44 front.

I also have PSC line kits for sale and surplus center lines for sale. Good cheap trail spares if you are already set . I would hate to bust a line on the trail with no spare.
 
I'll go third in line for the smaller ram if you'll ship. This would work for plain old assist on a d30 right? I already have a rebuilt tapped box in place.
 
DeftwillP said:
I'll go third in line for the smaller ram if you'll ship. This would work for plain old assist on a d30 right? I already have a rebuilt tapped box in place.
Click to expand...

I would not go with a 8" ram on a 30, the 30 knuckles/pitman arm throw are ideal with a 6" ram, you would probably break things or need to limit it a ton, not worth it in my point of view.
 
blondejoncherokee said:
OK. Jake is first in line for the 8", the 1.75x 7.5" is like perfect for almost any dana 44 front.

I also have PSC line kits for sale and surplus center lines for sale. Good cheap trail spares if you are already set . I would hate to bust a line on the trail with no spare.
Click to expand...

sweet. I need to get my hydro fixed. I'll probably want those lines off you too depending on length

I need to get on NAXJA more often. didn't even know you had these
 
CAJJ93XJ said:
sweet. I need to get my hydro fixed. I'll probably want those lines off you too depending on length

I need to get on NAXJA more often. didn't even know you had these
Click to expand...

The lines are super long and cut to fit. I also have 45* and 90* fittings for them, I paid extra for additional 45* s. I started to cut one line, but never cut through I think, but they are crazy long even then.
 
Ya you can cut these down jake. They are cut to fit. It seems these psc lines are perfect for your situation.
 
smokinlib1 said:
Hey Jon. Don't return them just yet. I need to see if they will work for what I have planned.
Bob
Click to expand...

I think the 8" and PSC line kit is sold today. I will still have the 1.75"x7.5" and the surplus center lines.
 
Last edited:
You must log in or register to reply here.

Similar threads

blondejoncherokee
PSC ram 1.75" x 7.5 throw
Replies
0
Views
997
blondejoncherokee
blondejoncherokee
Back
Top