cshontz
NAXJA Forum User
- Location
- Lancaster, PA
I'm aware that the shim degree requirements tend to vary among different lifted Cherokees, especially due to numerous variables.
However, based on your experience, what do you think would be an appropriate degree for shims on an 2001 XJ, Auto, w/ 8.25 rear, Advance Adapters SYE, stock shackles, no tcase drop, and generous OME JC1B (around 3") rear springs?
This may require trial and error, but I'm looking for a ballpark degree - one that would probably work, and yield no vibrations whatsoever. I'd like to install the correct shims the first time, and this isn't that much lift, so it should be feasible.
I greatly appreciate your suggestions. Thanks!
Stock:
However, based on your experience, what do you think would be an appropriate degree for shims on an 2001 XJ, Auto, w/ 8.25 rear, Advance Adapters SYE, stock shackles, no tcase drop, and generous OME JC1B (around 3") rear springs?
This may require trial and error, but I'm looking for a ballpark degree - one that would probably work, and yield no vibrations whatsoever. I'd like to install the correct shims the first time, and this isn't that much lift, so it should be feasible.
I greatly appreciate your suggestions. Thanks!
Stock: