Recent content by sofo259

Unless that 01' has ben beat to death, your ball joints might not be the issue.. maybe a combination of all that..and out of alignment jack up the front end and check for ball joint play (up-down) and TRE play (side to side)

Its not, I've played with it a bit too with no changes in the problem, and I've cleaned most of the plugs out.. Tomorrow I'm also gonna pull all the plugs around the relay box and clean them out and throw some dialectric grease in there, cause something keeps on telling me its a bad connection...

Today I checked my solenoids, all 3 are good, and show 11-15ohms. I also pulled off my NSS, took it apart and it was full of dirt and crap so i cleaned it out put it back on. Still does the same thing. Tomorrow I'm gonna pull my crank sensor back off, clean up where it sits, and stuff, maybe...

Looks like my cherokee in the early stages, 3" of lift and 33s, now I have 4.5" and 35s.. Oh and paid $300 for mine.. damn maybe thats why it keeps breaking down

Heres the story, last wednesday driving down the road my jeep just cuts off out of no where, find out the crank sensor wiring was laying up against the manifold and melted through, replaced that and it wouldn't start, actually the injectors were not firing. Thought I might have fried my PCM, So...

Still have the PCM?? If so PM me the numbers on it.. I need one with #56028297 under the barcode

bump for the night people

on topic... usually when batteries are under warranty its under someones name like your starter, alternator, and water pump that came from autozone.. A bunch of my friends bought them, I never did but have 2 of them.. So you might not be able to warranty it out as easily as you think.. My...

Bump

I tell people my LCA mount is bent cause of a fat rock.. its really cause of an infiniti :sure:

You dont need 6.5" to fit 35s just so ya know.. Keep it low and wide! And welcome to the addiction, or hobby..

When you keep on popping engine control fuses and realize the way jeep ran the o2 wiring is dumb and laying against the manifold melted.. ask me how i know...

BS is 3.75", 5x4.5 bolt pattern Black in color.. These exact wheels here http://www.4wheelparts.com/Wheels/Rock-Crawler-Series-152-Black-Street-Lock-Wheel.aspx?t_c=11&t_s=209&t_pt=100021&t_pl=3361&t_pn=PCW152-5165 Two of the wheels have some damage to the "lock" ring but just cosmetic damage...

Still got these??

Well SOaB!! I was gonna come on up this weekend with a trailer and cash in hand!!!!!!!!