Recent content by Rocky

I'm with Bender, I ran 1\0 welder cable to the PDC and starter, 1\0 for my ground, 2\0 from alternator to +, solder on copper lugs, heat shrinked the joins. I pulled the fuse out of the PDC and replaced it with an in-line 100 amp marine grade fuse. Then I put some mil spec quick release clamps...

Looks good so far, what's your ideas on the interior of the door? Doesn't matter or cut and fit the stock door panel to fit or maybe some matching carpet cut to fit? I want to buy an extra door or doors (never thought of the fact that the time put into fabbing the passenger side door is a...

Thanks so much for the help, that is exactly what I needed to find out! Thanks again.:D

No one has any ideas? Oh no, the wife is going to love this (now look at what another one of your modifications has done!). Please give your thoughts, anyone have a FSM for a 93? Where to look for DTRL module?

About a month ago I wired in 2 relays for my high & low beams to bypass the stock headlight switch. Now for the trouble, I live in Canada and my 93 XJ is equipped with daytime running lights. The daytime running lights are feeding a reduced voltage to a relay causing it to do a high speed...

I have done the same mod as you are describing. The part # is EK RE 0810 for the K&N that's about 9" or 10" long and tapers from 6" to 4-5/8".

Did anyone see the article in this months 4WOR? They installed the T&J tube stiffeners and also a brand new product never before installed. It looks like 3/16" plate, formed nicely to copy the uni-body rail from the front leaf mount on the rear to the LCA mount on the front. They then stitch...

My grandfather is a mechanic, has been since WW2, he swears that a 50% diesel & 50% ATF is the best there is. Works great for me, haven't tried it with kerosene, although I think it would be similar. How's the new XJ coming? Sorry to see the old one all messed!

Check this out, the nicest looking install I've seen, gonna doit to mine, and the wife even likes it! http://www.ericsxj.com/vents.htm

I live in Manitoba, shipping to you might be scary, although I couldn't say for sure. As for front bumpers, I'm in the process of building one right now, non-winch bumper with d-rings. Let me know what type your looking for,pre-runner, box tube or air capable?

I have talked to several people who swear that 88-96 type Mustang seats bolt right in. I haven't had time to search for some yet, but I think they would work really well.

What kind of bumper are ya looking for? I live just north of you, across the border, have built several bumpers, have 1 stock XJ and one custom, pm me and let me know what your looking for and what your your running on your XJ. Maybe we can wheel sometime.

When alligning the bolts in the UCA, I started with the rear bolt and slipped it through. Then I arranged a small hydraulic bottle jack under the front diff, on the track bar mount, to twist the axle into place and alow the bolt to just slide in. It worked good for me.

Looks cool, nice touch. Having a problem with an oil leak or is it the rad, front diff looks soaked! Hack something else up, I like it!

btt