Recent content by marshapepper

look at the MTR's in 40" there made in a comp compound. very sticky, my buddy runs them on his yj, and they do awesome in every terrain we've found here in alaska. actually most size mtr's can be had in 2-3 different compounds most people don't realize that.

thanks that is much sweeter that what i was origanally thinking and looks beefier also. that's what a writeup should look like.

so, i'm thinking about moving my shackel mount point down a bit to provide a little bit more lift and to allow the shackel to have more travel w/o hitting the body (or what's left of it). i think i'm going to pinch a piece of tube in where the shackel sits now and put some plate on the outboard...

go straight to tom woods for the kit he'll take care of you, and its $525 w/ shipping, i don't really trust rusty's that much anymore.

i hooked it in the middle of the upper line. that is the way b&m's instructions said to hook it up. that was the line that got hot first, while in drive with someone stepping on the brake.(i was kinda scared since my "someone" was my wife, it was her jeep and the whole front end was in pieces on...

if i remember right they were sae, i got mine at ace hardware, i just used brass plumbing fittings i had to use an adapter to go from the line side to a barbed fitting but it was'nt had to find them at all other than that, (i won't tell you how i learned they are not the right fittings or how i...

i have the same thing and i went throught the radiator then cooler. just did it a couple of weeks ago and drove it from cali to idaho and back (850 mi. ea.) last week without any problems, then agian i pulled out my A/C condenser while i was at it(converted A/C to onboard air) my tranny never...

4 sale.

is it still up?

might want longer shocks too, if you haven't put any on already

i have everything plumbed to a kilby ent manifold w/ a quick disconnect fitting and i just bring a portable tank with me when i go wheelin (for now) i just plug a hose from the tank to the manifold and another from the tank to my tool, airchuck, whatever.

thanks guy's that gives me a couple ideas. what if i switch the rad. and condenser and try that, or i might hit up the junkyard and see if i can find one there. jc whitney also has a combo engine oil/tranny cooler on sale for $115 right now so maybe that's the way to go i could mount that in...

no one has any thoughts on this

since i converted my a/c to on-board air could i use my condenser as a tranny cooler if i adapted all the plumbing of course? i'm just wondering if it could take the pressure and would have enough flow? what do you guys think.

hey everyone, i putting in my oba system and i'm having trouble getting it right. i have elect. power to the pressure switch but none coming out what could be the problem? it's a brand new switch from kilby ent.