Recent content by jack96xj

4.56 MOTIVE GEARS FOR A DANA 30 HP. THESE ARE REVERSE CUT GEARS. NEVER INSTALLED. $150 OBO. NEED THEM GONE ASAP. DEPLOYING SUNDAY. CASH AND LOCAL P/U ONLY. CALL JACK 760-687-8537.

agree with cottontail completely. Had a buddy of mine give me bilstein 5100 from his wrangler. work great!

Alrighty actually found out why it does work folks. Some of you may want to keep this little nugget of knowledge for your own and use later so here it is......The 01 XJ Sport has exactly the same front end as the 01 TJ. Dana 30 short pinion, it is also a low pinion from end that uses standard...

alright everyone is as confused as I was. The tag on the front end diff cover said 3.73. I pulled the gears and counted teeth after the install and 11 tooth on the pinion and 39 on the ring. Went to rusty's offroad and used there calculator and it says 3.55 gears. RCP PHx they never made what...

Okay since I have just recently finished doing the gears in my 01 XJ. The front dana 30 was quite the ordeal. First I got the wrong gears, reverse cut instead of standard (giant pain got it worked out though), pinion and carrier bearings. So here is what I am left with a new set of 4.56 gears in...

so what is the difference in gears between a LP TJ short pinion Dana 30 and a LP XJ Dana 30?

whats wrong with the shoes on your? ha ha I know what you are using them for!

Thanks you guys are great! Now I know to get the pinion shaft shims instead of a crush sleeve. Unfortunately I already tried the sleeve and I thought I did something wrong as did the guy helping me out. Not the case. Thanks again!

Trying to figure out if I need standard rotation gears or reverse rotation gears. I have an 01 XJ and trying to get it figured out. I understand if the comb of the teeth goes away from you as you look at the ring it is a standard, if the comb comes toward you it is reverse. Any help with...

what gears? what size will the air locker go up to?

um.....gear indexed properly? I thought you just kinda dropped it back in. But yes the plug is hooked up and the wiring has good continuity.

So my speedometer sensor is out and I am driving on RPM's to gauge my speed. I know my sensor is out but I cant find a part number or a store that has one. I have an 01 Sport with 231. Anyone have a part number and location I could get one? Thanks, Jack

done and done! swapped them out and put on an sye, new bearings, mainshaft, front gears and chain! No more problems! I mean it runs smooth! No more "rough" ride (by rough it literally felt like grinding going on). I am very pleased and am happy to announce that I am going back on the trail next...

I happen to be in the military and could get you some water cans if the opportunity arises. I will get back with you soon.

there is always national drivetrain