Recent content by HouseVVares

Hey all, cleaning out some parts from my never ending XJ project. Everything is in Round Rock, Texas. I have pictures of all the items I can send if you are interested in anything. I'm willing to ship the pump and pump assembly. I'm thinking the other items are more trouble to ship that I...

I'm running a WJ front conversion and the rear is Ford 8.8 disks. That is part of why I wanted the extra adjustability of an aftermarket PV. Sent from my Pixel 2 XL using Tapatalk

Maybe this will work... Sent from my Pixel 2 XL using Tapatalk

I removed the complete ABS on my 98. I used an adjustable proportioning valve from Summit Racing. The three hard lines on the chassis (front left and right and the rear line) I kept and needed to slightly tweak the shape to get them to line up with the ports on the valve body. I did make the...

I had seen that style for grabbing on to the drag link. I was curious if that style would stand up to off road use or if it might be prone to slip. I guess in anycase, the mount on the drag link side could be welded on as well right? I'm guessing as far as mounting the shock, just try to keep...

I'm planning on using a JCR OTK 1 ton steering kit. From looking at the install instructions and pictures, I don't see a steering damper. From reading around it sounds like adding one would be a good idea for my DD XJ? So, does anyone have a recommendation on a good setup that would work well...

That is a good link, had not seen that in my lurking... It is kind of funny to me though, Seems the stock setup does not have much clamping on the unibody but maybe I'm not understanding how large the nuts are on the inside of the body sheetmetal. I need to climb up under the XJ again though...

New guy learning about XJs. I've started a project to to lift a '98 with a 4.5" kit. In the process swapping in an 8.8 axle. Last night while pulling the stock rear setup, found 2 of the rear shocks bolts were broken already, the other 2 just spin when I try to pull them. A little research and...

I'm in a similar situation; if you add drop brackets, can you still use the same control arms? Or do they need to be shortened to the point you need to get a different set?