• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by black_goose

  1. B

    flexplate replaced now weird start noise (with sound file)

    thanks buddy i'll be sure to check that out.
  2. B

    flexplate replaced now weird start noise (with sound file)

    First off I apologize, the noise only happens DURING cranking NOT when the engine runs. So yes that one second of noise is that high pitch screeching sound i'm concerned about (hopefully thats what you're talking about) I hope that they used a new flexplate. I believe thats what I was told...
  3. B

    flexplate replaced now weird start noise (with sound file)

    So I just got my Jeep back from the shop after replacing my flexplate. It'd been sitting out for months before than so my battery drained and got bad. Got a new battery put it in runs fine. The shop obviously took out the torque converter, tranny and t-case to get to it. So what happenes now...
  4. B

    Engine Gauge problem

    I see what you're saying :confused:
  5. B

    Clicking comes and goes, not piston slap, not lifters?

    ya that is my mistake considering there's a QUESTION MARK at the end of his supposedly STATEMENT but seriously folks, please work on your grammatical integrity
  6. B

    Jeep doesn't start / dies

    that sucks, good job
  7. B

    Clicking comes and goes, not piston slap, not lifters?

    lifters? or noise injectors?
  8. B

    torque converter issue (tricky issue need some gear heads)

    how did it feel like when you were accelerating while it was locked? did it feel sluggish? like you lost some power?
  9. B

    torque converter issue (tricky issue need some gear heads)

    could the adjustment of the NSS be a culprit? dementedXJ: thanks, i'll check the OHMS of the solenoid from the TCU, and have the brake switch checked out. anyone know exactly what the OHMS should read? should the vehicle be running when i'm checking it from the TCU? 11-14 OHMS right...
  10. B

    torque converter issue (tricky issue need some gear heads)

    DementedXJ, I've noticed while I was doing my research that this happens mostly on 97-99 Cherokees, which stumps me. I'm going to replace my TC solenoid anyway regardless. Is there a way to check if the wiring is to the tcu? Or do I have to figure it out after I replace it? Saudade: thanks do...
  11. B

    torque converter issue (tricky issue need some gear heads)

    and i see you're from houston
  12. B

    torque converter issue (tricky issue need some gear heads)

    is that defenitive answer? and what does this switch look like?
  13. B

    torque converter issue (tricky issue need some gear heads)

    Hey guys, i'm having some trouble with my transmission/torque converter. I'm just gonna summerize my problem so I don't waste any of yalls time. 98 Cherokee (4.0) 163,000 miles (still running strong) 242 transfer case AW4 Transmission A while back my transmission wouldn't lock up in...
  14. B

    transmission lock up problems (need some hard core techies)

    Hey guys, i'm having some trouble with my transmission/torque converter. I'm just gonna summerize my problem so I don't waste any of yalls time. 98 Cherokee (4.0) 163,000 miles (still running strong) 242 transfer case AW4 Transmission A while back my transmission wouldn't lock up in...
  15. B

    Never a good way to introduce yourself

    so you're comparing a gay person to someone who's an alcoholic and a drug addict?
See more
Back
Top