Recent content by avalondanes

  1. A

    No Start, guages dead

    Yes, cleaned batt post and cables. Then replaced cables with new #1 size cables to body grounds and positive cable to starter, replaced battery with new battery. Still same, spins over, not fire up.
  2. A

    No Start, guages dead

    I have a 94 xj 4.0 HO. Started having no start problems. Needed jump start, found alt bad, replaced. Everything fine for a few months. Then started again with no start. Found CPS bad and replaced with NAPA cps. Again ran fine couple months. Now no start, no guages move with key on or check...
  3. A

    Overheated

    Thanks for the info, I will check them out. Richard
  4. A

    Overheated

    Hey all, I have a '94 xj that I just got, has 230K on a 4.0 HO w/auto trans. Went to Lowes to get some stuff and on the way back the plastic drain for the radiator let loose, I did not know until the idiot light came on and steam from under the hood. Tow back to the house, inspected and found...
  5. A

    Rear Disc Brake conversion

    Is there a disc brake conversion for 1994 XJ with 8.25 rear axle ? Maybe parts from another year xj that would work ? Richard
  6. A

    Gauge cluster swap

    That's what I thought, thanks. Richard
  7. A

    Gauge cluster swap

    I just want to make sure, as not to pass up a cluster. I have a '94 XJ with idiot lamps and want a gauge cluster. '97-'01 clusters will not work, correct? I have to get a cluster from a '91-'96 ? Richard
  8. A

    First XJ, what to look for and repair

    Thanks all for the tips ! I am a mechanic, so all is easy to do. Have changed all fluids and flushed trans converter, ps, and coolant. Will do tune up and check engine cyl. compression on Sat. Then have the DW wiggle steering and stuff while I check under side. Richard
  9. A

    First XJ, what to look for and repair

    I just bought a '94 2 door XJ 4.0 HO. The owner thought it had a spun rod and sold it to me for $400. After I got it home and checked it out found torque converter bolts loose. Tightened them up and no knock. What should I look for as far as potential problems. After I get it dependable I will...
Back
Top