GreatOdin'sRaven
NAXJA Forum User
- Location
- Las Vegas, NV
Hello,
1999 Cherokee Limited 4.0
I've installed a remote start on my cherokee. It successfully turns on my jeep but doesn't run the blower motors.
They turn on when I put my key in and rotate forward.
I searched through threads and found this post:
I don'tunderstand. black/orange is Ignition 2 for my cherokee
Does this mean split the wire from the remote start unit labeled "(+)12V Output to Accessory" to both Black/white (accessory) and Black/Orange (Ignition 2) ??
Anyone run into this problem before?
1999 Cherokee Limited 4.0
I've installed a remote start on my cherokee. It successfully turns on my jeep but doesn't run the blower motors.
They turn on when I put my key in and rotate forward.
I searched through threads and found this post:
Not a stupid question at all... as it turns out I am the stupid one here. After tracking down a FSM I noticed tat when installing the remote start in a 97+ (?) you need to tie both into the keyed 12 (run circuit) and the black/orange wire (ACC) in order to get the blower motor circuit to work. Everything works like a charm now.
Thanks for the help guys.
I don'tunderstand. black/orange is Ignition 2 for my cherokee
Does this mean split the wire from the remote start unit labeled "(+)12V Output to Accessory" to both Black/white (accessory) and Black/Orange (Ignition 2) ??
Anyone run into this problem before?