Search results

Anyone here running one? Had a stock box on 37's tons etc. Finally gave it up couldn't really turn locked. So put a modified wj pump on helped a bunch. So I bought the Psc box supposed to be a lot more powerful than stock right? put the first one on turned great to the left but anything going...

Hey guys I always find great info here so I thought I might share. I purchased a psc pump to put on my rig. I could not come up with a suitable solution to keep the remote reservoir under the hood. I will address this later when its not snowing. So I needed a solution to make my current set up...

Was looking at picking up a 2000 has engine trouble. I have a clean great running 4.0 from a 94. So I googled what is necessary to swap them. The cps and coil pack brackets are no big deal. I really was hoping someone here had done this as to how to make the exhaust work. I will use the intake...

Was wondering if all the trans cooler lines are basically the same? I am doing a motor swap on a 98 4 door but the lines are absolutely butchered. I parted a 91 2 door has very nice lines. The ones from the 98 are so bad I cant even lay them out to try to match them up. So for future reference...

Can't seem to find an answer on this. Have 98 xj swapping motor from 91. Noticed the oil filter housing is cracked on the 91. Are the vertical and horizontal housings interchangeable?

Spent the last few hours helping a friend change the transmission in his 90 XJ. We put in a 93 AW4 and 231 from same. I did not realize the Renix uses a damn speedo cable. Can you just unbolt the cable adapter from the 242 and put it on the 231? write-ups? I looked for a minute but I'm tired as...

I am almost finished mocking my three link and steering on my 93 with 60's. Due to space constraints I could only get the track bar within 1 3/4 inches of the drag link. This rig will have hydro assist. My question is there will obviously be some bumpsteer with the drag link and track bar not...

Sorry for the newb question but how do you measure link separation on a three link? Is it from center to center of the mounts? Or bottom of the tube to top of the other? Thanks...

This Is a two part question first as I am trying to get my coil/link mounts situated. I noticed maybe what appears to be a problem. In the picture you can see that the angle from the cross member to the lower link looks way off. Looking at the stock 30 the coil mounts are straight but the lower...

I finally have my Tera 60 under my rig and its time to build some links. One of my buddies who was helping me says he has some 2.5 od .25 wall dom and slugs he is not going to use from a buggy build. I went and looked at it its freakin huge! Is this just massive overkill for a xj? will it be so...

For those of you on tons with 3/4 or 1 ton brakes what are you using for a prop valve? I have a zj disc valve or is it going to matter with this much brake?. Tera 60's front, rear 14 bolt outers on rear with 3/4 ton chevy brakes front are 1 ton chevy. Thanks

Ok guys I need some help. I have a front Tera 60 that is shortened and built ready to install. I have never done a custom front like this before. Can anyone point me to some links or builds that deal with this? I have searched and found all kinds of threads but no one seems to cover how to make...

I'm in the market for a chop saw was looking for opinions on what you guys use and think is best not the cheapest. Need to cut 2.5 od 1/2 wall dom and every other size below it. So what does everyone think?

So I won a Dirtbound Offroad universal battery mount at Fall Fling and went to install it. What I got was a freakin mess. The old tray simply ripped out with one hand! Ughh what a pita now what? Suprisingly theres not much out there searching for this. Heres what I'm dealing with

To all who have done this did you have to use the stock alt charge wire? The one that hooks to the alt stud. It looks like it goes back up through the harness under the pdc somewhere. Or do you just bypass it? Its a 93 with 4.0 and the small two stud pdc. I was going to go straight from the...

I need a ps fender any color anyone close maybe have one? pm here thanks

Anyone recognize these long arms and brackets? Home brew? Thanks guys

I am redoing my shocks this winter have decided to go through the floor in the rear to get what I need. For those of you that have done this mod in the front also I was wondering how you attatched the hoop to the "frame"? I have searched found a lot of good pics of the engine bay and upper part...

Question 1.Is it possible to set pinion angle i.e. tack perches onto a bare housing without the xj on it's own weight? I thought it might be easier to handle before I get the gears and lockers and hubs installed. Or am I way better off setting it up fully then set the perches? I have some wheels...

I have tried searching this but not getting what I need. First question is are xj rear axles offset a little? I think they are by my measurements by just a hair over 3/4 of an inch. The reason I ask is I am mocking up my new rear axle wich is also offset a little but by just a little more at 1...