Search results

Thanks for the input

Pretty simple question. I have a rugged ridge slip yoke eliminator for my 98 xj and the output seal is leaking. Will a stock seal work or do I have to order one from rugged ridge?

I added the shackle relocation bracket and use longer shackles, you might get 1.50''. I then added a 1.75" coil spacer and adjusted the long arms to center it. All that on top of RC 6.5 long arm. I know it seems high,but my front and rear bumper weight it down, plus over time your lift will sag

Are your leafs from the 6.5 long arm kit?

UPDATED The FSM manual shows you how to check the brake light switch with continuity. So we can rule out the brake light switch being the culprit.

98, auto,4.0L My brake lights recently stopped working out of the blue. All my other lights work fine.This is what I've done so far. -Checked Fuses -Changed Bulbs -Looked for loose connection -Changed Brake light switch I tested the brake light switch with a testlight on every wire with...

appreciate the info. Im just going to stick with the xj box. Doesn't seem like much of a upgrade.

Does the stock pitman arm fit on the dodge durango steering box? Can someone clarify exactly what year and model(snow package or not) please?

I just installed the same gears in my 98. Those are the right part numbers. I dont know about the master overhaul kit though.

serious?? quit flooding pages with useless questions like this

98, auto, 4.0 My remote starter stopped working almost 2 years ago and now I want to fix it again because of cold winters. I bypassed my NSS. I was wondering if I needed the Neutral Safety Switch in order for the Remote car starter to work??? I'm guessing it stopped working when the nss...

They are good in snow, especially when aired down. But for driving on the winter roads, its not that great unless in 4x4

98 xj, auto My horns stopped working out of nowhere. I tested the relay and it still works fine.. I can hear it click when I press the horn. I also checked the horn relay fuse in the kick panel. I dont know where to start finding the problem. Any help would be greatly appreiciated.

4.56 and 35's is a perfect combination

Thanks guys. I've looked pretty hard and can't see nothing wrong. I'm just gonna get it re-align

I have currie HD steering setup and its pretty beefy. I didnt hit the rock hard and it was big so it stopped the jeep. As I stated before, it drives the same as it did before, except for my steering wheel turned.

If I had a bend drag link or track-bar, wouldnt it drive all over the place or death wobble?? and my steering wheel turned 90* my guess was other something in the steering box or maybe clock spring?

I hit a rock with my driver side tire doing about 20km/h and came to a dead stop. First thing I did was check by eye if my aligment was OK, and also check my tie rod ends and the whole steering setup was fine.I didnt notice the driving was any different and it drove straight on the road. The...

The lights were working fine for about 2 weeks, then out of nowhere(again) they just stay on. thats what I keep finding weird

UPDATE... I changed the trailer light box and it didn't do anything. The tailight sockets seem fine, no rust or corrosion. I failed to mention that my jeep came with a remote starter. As mentioned earlier, If I pull the #33(Ignition Run/Start) fuse under the hood, it will cut out all the...