Search results

http://raleigh.craigslist.org/pts/3538280344.html Three are aftermarket 15x8" black painted steel wheels with around 3.75" backspacing if I remember right. One is a stock 15x7" steel jeep xj cherokee wheel. One is a 15x8" black painted aluminum aftermarket wheel mounted to a grooved, bald in...

http://raleigh.craigslist.org/pts/3548753790.html The jeep is currently not running (fuel pump and/or NSS maybe, it cut off on the trail, towed it home and usually gets no power at ignition now). Has I6 4.0, Auto, 4" lift front coils, rear bastard pack with extended shackles, 3.55 gears, dana...

Is there a junk yard main leaf I can use that will correct my shackle angle so I dont have to buy the hd offroad shackle brackets? I also need the axle to stay in roughly the same spot. If anything, towards the rear.

I just got around to pulling my used lockright out of the carrier it came in and noticed that it seems to be missing the spacer washers. I guess they are supposed to look like the third piece from the left in this pic: http://www.jeepaholics.com/tech/lrhubs/P9250829.JPG Ive never messed with a...

Well after installing a new csf 2 core rad on my 89 xj w/4.0 and converting the system to newer style to try and fix my overheat i noticed my mech fan was easy to turn with the engine hot or cold. i am told this means a bad fan clutch and if so, I want to replace it with an electric fan i can...

Will these tires rub anything when mounted on stock 97-06 wrangler steel wheels? Would be going on an 89 xj with around a 4.5" lift. Also have two 1.75" wheel spacers if needed.

Anyone know if the rear caliper soft lines from a 93 zj work on a 00 C8.25" with 94-98 zj disc brakes?

My 89 XJ is my second vehicle and I rarely drive it. Ever since dish soap was put in the cooling system to try and flush it (dont ask) it has had an issue with overheating. If it's just idling it wont overheat, but if I drive down the highway or 4wheel it (medium to high revs) it will go to 235...

Is there any reason to have adjustable upper control arms rather than adjustable lowers? I was thinking of getting just one adjustable set to correct caster and save money. I am trying to decide between a used set of street driven RE3715 SuperFlex adjustable lowers...

The previous owner of my 89 XJ with 4.0 told me he replaced the motor with a lower mileage unit from the junk yard (can't remember if he said newer year model). I now need to get a new power steering pump housing and lines and know that I will need the year model to get the right ones. Is...

When trying to bleed the brakes in my 89 XJ after installing a 2000 8.25" axle I heard a noise (maybe a clunk or something) when bleeding and the fluid stopped coming out of the brake line. I couldn't get more than a trickle so I let it gravity bleed for about an hour. That didn't work, the rear...

So I went to the PnP to get a gas tank skid plate today. I got it off and realized I needed to take the nutstrips too so the bolts would have something to thread into. This forced me to remove the hitch and then the bumper so I could get to the nutstrips. Well, when I was finally able to see...

The rubber part at the end of my front bumpstops inside the coil springs is almost gone on the passenger side. Does the bumpstop unscrew or is there some other day to replace it that doesn't require welding? Since I get tire/fender contact I'm going to jb weld some hockey pucks or wood pucks...

I'm considering buying this bumper, but I'm worried that the clevis mounts not being welded through and the minimal factory mounting may cause it to not be strong enough during hard pulls...

I bent the tie-rod on my 89 xj and am trying to decide what to buy on the cheap as a replacement. I found this system from Crown: Crown (Stock ZJ) $177.95 http://shoplive.rompalicious.com/crown-heavy-duty-steering-upgrade-9101-xj-9706-tj-p-1946.html?m1track=googlebase&language=en#googlebase...

The previous owner said he replaced the TPS and TCM before he sold it to me, but that the TPS just needed to be calibrated. So with switch on I got 4.71V input and 4.6V output. Input never changed when adjusted, but output would change to 4.36V. Output/Input does not give the optimum .825-.835...

In viewing the readers rigs section I'm unable to see some people's attached pictures. If I click one of the picture file names in their attached images link, it says: Ulver44, you do not have permission to access this page. This could be due to one of several reasons: Your user account may...

I just did a SYE in the rear and am using a front drive shaft with it. I'm assuming the bolts that I need are the same as what's used in the front drive shaft where it bolts to the transfer case yoke (5/16" head I think). I accidentally ordered u-joint hardware for a regular 1310 u-joint online...

I'm about to order a HD SYE kit and axle shims (or longer shackles) and have a few questions. Does the PORC HD SYE come with a new rear output bearing? Would a 6 degree shim point the pinion a hair under the TC output? I have around 3-3.5" of lift. I read that some early NP231 produced from...