Search results

Here are some pics of my junk various pics from the build up. The steering has gone through 3 stages. First I had a Hi steer setup with the drag link going to the top of the knuckle and the tie rod in the original locaiton. I got tired of hitting that so I did a full hi-steer setup with...

So here is my writeup on the NP435 + doubler swap into my Jeep XJ. Whilst I was at it I also swapped in a NP203/NP205 doubler transfercase setup. For reference my jeep was originally equipped with the AW4 automatic transmission. To begin with I will start with a list of clutch related parts I...

So I'm in the middle of a granny low swap into the XJ. I'm putting a NP435 and I needed to fire up the engine with the modified bell housing to make sure I got the CPS in the right place. I jumpered the 'B' and 'C' connections to make the tranny computer think it was in neutral so I could fire...

Well I finally got my XJ build up done. Well not really There are lots of things left to do. Hydro assit, some more gussets, custom soft top, dash, grill, cargo boxes, tail gate and a cover over the gas tank. I know I need to gusset the tie-in in the back where the D connects to the Halo and...

I haven't received any response from the possible buyers of this stuff so here it is again. I have some 50% 33x15.5x15 Dunlop mudrovers on 15x10 5on4.5 rims. $200 pick up only. I also have some d30 and D35 4.56 gears. The D30 gears are the ones that got muched a little when my cross shaft...

Ok, I want to get a hydro assist stetup on my XJ. I am trying to figure out what size of ram to run. It seems to me that if you run to large of a ram you will require quite a bit of fluid that will only be provided at a fixed rate. This will slow the steering wheel to the point that if the...

Selling these for a buddy they are BFG MT's on black 15x8" steel rims w/4" backspacing. Two tires at 55-60% and two at 45-50%. Lots of life left on these. I had them siped this winter, now they grip better than ever. $200/offer. PM me if interested.

Rear Dana 35, non c-clip, 4.56 gears, powertrax no-slip locker. This axle has been trussed and has a bracket for an anti wrap bar, no brake lines, $300 Front Dana 30 disco style, 260 u-joints, 4.56 gears, these are gears that got messed up when my cross shaft sheared. The pinion got munched a...

I am getting ready to swap in my new axle and it looks like the pinion angle is going to suck. I probably should cut the C's and rotate them. Has anyone had any problems with there D44 or D60 having vibes in the front? I am running about 8" of lift and the axle is a 79 Ford D60.

So when you put the axle in the front did you keep the LCA axle mounts the same distance apart? On a full width 78 ford 60 it looks like the mounts will need to be a little wider or the drivers side mount will have to be welded to the housing. Also what did you do about the UCA mounts? I am...

Here is the pattern on my new 14 bolt gears. Sorry for the huge pics.

So I am getting everything together for a full width swap. It looks like it is going to be a D60 front and a 14 bolt rear. So should I plate the pseudo frame? I am thinking about doing something like Ashman did but it will put my jeep down even longer. I figured on running some limiting...