Search results

I know this is in old thread but the only one that turned up on my search. Just moved from CO and looking for something to play in. There has got to be some wheeling close to Omaha, KS is not close. Even for just a half day? Let me know

Thanks for all the help, got it done!! Are the magnets in the bottom of the pan use to collect debris that might get in? I filled the trans through the dipstick, saw a write up do it, but is the fill plug a 1 1/2 inch plug with a metal ring on the outside?

Ok, I'll switch back to Dex/Mer. What the Hell should I do with all this ATF+4 I have sitting in my garage? Is it safe to put in the transfercase?

Changing my transmission filter fluid, and I have this metal tube that goes from the bottom of my transmission pan to the top of my transmission. the tube doesn't seem to want to move and I am unable to get to the filter underneath the pan. Any ideas on what it is and how to remove it? Going...

Just bought a 2000 XJ. Replaced the washer fluid reservoir with one from the junk yard, 91 or something. Anyway I can not get any of the pumps to work, the ones that came with the 2000 or the two that came with the 91 reservoir. Is there a fuse to the washer fluid pumps? I looked in my owners...

I use to work at the Discount on Wadsworth in Littleton. They hooked me up with some MTR's for cheap.

Sounds like the 91 Manual does better then the newer autos.

Thanks for all the input. I will put a lift on and see how it does. If I think it needs some power then I will look at gears for it. and hopefully a bumper and a winch will add the weight to force me to do gears.

I have a 91 XJ with a 4" lift and 32" tires. The XJ is a manual with 278K on it. I am constantly driving over Vail pass/ Loveland pass in Colorado. My XJ will go 65mph up the pass in 3rd gear. I am replacing my jeep with a 1999 or newer XJ, but am switching to an automatic. My question is will I...

Still not working. Part # 98126

Re: Poly Shock Bushings lets try that again. Bushings http://www.energysuspensionparts.com/proddetail.asp?prod=9%2E8126 Shocks http://www.rocky-road.com/xjshock.html

Decided to go with some energy suspesion front upper shock bushings, going thourgh rubbers to fast. Link http://www.energysuspensionparts.com/searchDLSS.asp Got this size because it was a match to the rubber bushings that came with my Rocky-Road shocks. link...

I am replacing my O2 Sensor. 1991 Jeep Cherokee lerado 4.0L. I read on the forums a cheap place to get them is oxygen geek, so I ordered one and just got around to putting it in. Come to find out the wire that came with the new sensor is to short. The wire that comes down from the fuel rail to...

I believe these are the cheap ones that people have been buying. I have not heard any complaints yet???? http://www.oxygengeek.com//index.html I also bought one but have not installed it yet.

Called the dealership, Well it looks like I am out a car for a couple days. Ship the part to a dealership then ship it to me. Thanks for the help everyone. Part was $12.99

Does anyone know the part # for the O-Ring needed to fix a leaking fuel pressure regulator? or what would work?

I called Napa to see what thay have, they do not know about a pressure regulator o-ring. Would the fuel injector o-ring kit work? They come in packs of 3. Part # FPG ES70599

http://i248.photobucket.com/albums/gg198/dodo4bird/IMG_1807-1.jpg This one should have the red circle.

I was warming up my 91 XJ, 266k, 4.0L, Manual I came back out to go to work and there was a puddle of gas on the ground. I opened the hood and this is what I saw. http://i248.photobucket.com/albums/gg198/dodo4bird/IMG_1807.jpg http://i248.photobucket.com/albums/gg198/dodo4bird/IMG_1806.jpg...

Both of my screws came out but had no problem getting the door open. Found one screw but other was missing and had problems with the door not shutting and the glove box ligth stayed on. but another screw fixed that. Maybe its a common problem.