Recent content by xjblaine

55 lb/ft i believe

I will be building mine out of pipe when the time comes....

none, cut your fenders :) I run 6" lift with 33's, and I have no need for 'em.

HOLY CRAP!!! I spoke to my steel guy today, he couln't get the dom I wanted, but I could get .388 wall with the 11/16 ID for about $100. Add the ~$180 for qa1 heims, ~$40for tapping (each tap, one RH, one left), ~$15 for drill bit, ~$25 for hardware and ancilliaries (is that even a word?), and...

yeah, but BP's are quite expensive. I spoke to Todd McCullen out a desertfab, he suggested some 1" OD .120 as a spacer...hmmmmm.....maybe.

cool, thanks. Anybody know if there are other misalignment bushings than what 4wheeler's has in phoenix? Theirs had a 1/2 diameter hole for a bolt, and fit the 3/4 heim. I'd like to run a 3/4" bolt with the 3/4" heim, if anyone knows lemme know.

for those of you running steering similar to what is available thru www.bulletproofsteering.com, what obstacles have you run into in setting this up? here's the plan 3/4" heims at each end of drag link and tie rod 11/16 ID dom .250 wall (what is the OD of this, anyone?), which can be tapped for...

broke mine with welded gears on the street. Carry a lotta spares.

MadMax, I read the description on your site; do you use the rotary knob to shift? or do you use the stock shifter? I'd be interested in doing this, but need more info.

legal in nm, but why would you do this?? I imagine spray paint would work well if you prepped the glass first with steel wool.

I'm getting movement in mine at the top two bolts on the 'frame' end of the tb. Don't know quite how to fix it, I 'm going to switch back to my rusty's tb and mount for now. Oh yeah, I'm running the RE tb w/stock mount.

It's terrible, it won't work at all.....you should sell it to me! and yeah, you can bust a tcase in half if you're dshaft is too long.

you should seriously consider joining a local 4x4 club. Around here, the labor discount for a full gear installation is $100, with the nice azvjc discount. Usually 250 beocomes 150 (at the right place, you gotta shop around when you're poor :) ). You got taken for your money, but I'm glad you...

you should find someone locally to help you with this. 3-400 is a LOT of money for something that can be done in a driveway with the proper tools in an hour, better yet, find a cheaper install place, around here they do $150 with the azvjc club discount. Otherwise, you're wasting your money...

I have 4" of backspacing, and they stick out far, here's a pic. http://www.azvjc.org/pics/5799_0442414334.jpg