Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
So, I ran out of time and money to spend on my XJ buggy and ended up buying a built rig. Everything I had for the XJ is for sale.
All Items are located in Abbeville SC. I'll ship smaller stuff on your dime.
Available items include:
-----------------------------------------------------------------
Axle setup:
2005+ Ford Super Duty Dana 60. In stock form. 3.56 gear ratio.
Matching Sterling 10.5 In stock form. 3.56 gear ratio.
1.5" DOM steering with heims and Hydro assist ram.
17" Ford steel wheels and roller tires.
Stock steering.
New Brake calipers.
$1,400
These are supposedly pending sale but I'll post the info anyway. If they don't sell I'll get some better photos than I have available at the moment.
-----------------------------------------------------------------
Dana 300. In stock form. Good condition. Just dirty.
$350
-----------------------------------------------------------------
Advance Adapters Dana300 32 spline rear output kit with new yoke. I think it's a 1350 yoke. I'll have to look to verify.
Brand new in the box.
$450
Don't have a picture. I'll get one when I check which yoke I ordered.
-----------------------------------------------------------------
Stump Fabrication NP231 Doubler and clocking ring.
$650
Yes, it includes the spud shaft and clocking ring. (Spud shaft isn't pictured because it's still new in the package.)
-----------------------------------------------------------------
Bilstien 5150 10" travel shocks and JKS stem top adapters
Used very little. Maybe 1,000 miles on them.
$200
------------------------------------------------------------------
Rusty's offroad 6.5" Coil springs.
$100
-----------------------------------------------------------------
4.5" lift leaf springs and 2" lift shackles.
$150
Not pictured but will get one upon request.
-----------------------------------------------------------------
Stock XJ steering box drilled and tapped for hyrdo steering assist with hoses.
$80
Not pictured but will get one upon request.
-----------------------------------------------------------------
1993 Jeep Cherokee 4.0 I'll have to check mileage but it runs excellent.
$450
It looks like a 4.0
-----------------------------------------------------------------
1993 4wd AW4. Shifts as it should.
$200
It looks like an AW4
-----------------------------------------------------------------
1993 XJ Tube chassis. Still needs front link mounts to be usable. Rear is setup for leaf springs. I had planned to cut all the remaining floor out of the rear and build a crossmember for links and coilovers. Didn't get that far.
Nice boat sides, all 1.75" DOM tube, dove nosed. This thing was going to be sweet with some skins, axles and 40's.
Has clear title, includes dash, harness, PCM, console, etc. No seats, drivetrain, etc.
Umm, $1500 obo
---------------------------------------------------------------
And it's a long shot but for S&G's... $5,000 would buy all of it since that's what I have to make off of all this.
Feel free to ask questions about individual items.
All Items are located in Abbeville SC. I'll ship smaller stuff on your dime.
Available items include:
-----------------------------------------------------------------
Axle setup:
2005+ Ford Super Duty Dana 60. In stock form. 3.56 gear ratio.
Matching Sterling 10.5 In stock form. 3.56 gear ratio.
1.5" DOM steering with heims and Hydro assist ram.
17" Ford steel wheels and roller tires.
Stock steering.
New Brake calipers.
$1,400
These are supposedly pending sale but I'll post the info anyway. If they don't sell I'll get some better photos than I have available at the moment.
-----------------------------------------------------------------
Dana 300. In stock form. Good condition. Just dirty.
$350
-----------------------------------------------------------------
Advance Adapters Dana300 32 spline rear output kit with new yoke. I think it's a 1350 yoke. I'll have to look to verify.
Brand new in the box.
$450
Don't have a picture. I'll get one when I check which yoke I ordered.
-----------------------------------------------------------------
Stump Fabrication NP231 Doubler and clocking ring.
$650
Yes, it includes the spud shaft and clocking ring. (Spud shaft isn't pictured because it's still new in the package.)
-----------------------------------------------------------------
Bilstien 5150 10" travel shocks and JKS stem top adapters
Used very little. Maybe 1,000 miles on them.
$200
------------------------------------------------------------------
Rusty's offroad 6.5" Coil springs.
$100
-----------------------------------------------------------------
4.5" lift leaf springs and 2" lift shackles.
$150
Not pictured but will get one upon request.
-----------------------------------------------------------------
Stock XJ steering box drilled and tapped for hyrdo steering assist with hoses.
$80
Not pictured but will get one upon request.
-----------------------------------------------------------------
1993 Jeep Cherokee 4.0 I'll have to check mileage but it runs excellent.
$450
It looks like a 4.0
-----------------------------------------------------------------
1993 4wd AW4. Shifts as it should.
$200
It looks like an AW4
-----------------------------------------------------------------
1993 XJ Tube chassis. Still needs front link mounts to be usable. Rear is setup for leaf springs. I had planned to cut all the remaining floor out of the rear and build a crossmember for links and coilovers. Didn't get that far.
Nice boat sides, all 1.75" DOM tube, dove nosed. This thing was going to be sweet with some skins, axles and 40's.
Has clear title, includes dash, harness, PCM, console, etc. No seats, drivetrain, etc.
Umm, $1500 obo
---------------------------------------------------------------
And it's a long shot but for S&G's... $5,000 would buy all of it since that's what I have to make off of all this.
Feel free to ask questions about individual items.
