cheapcherokee93
<----boat-manche
- Location
- Guadalahabra, CA
looking for a set of stock steering knuckles for a 90+. also interested in Calipers and good rotors for a 90+.
WTB: stock knuckles and brake parts
- Thread starter cheapcherokee93
- Start date
JohnX
Sarge
- Location
- Williams AZ
I have all that. Calipers are off, rotors are okay, axles and unit bearings are missing, knuckles are still attached to the d30. If you want it all, $20. You want me to pull the knuckles it will be more.
- Location
- WA state
Damnit, I need a D30 w/knuckles preferred. Let me know if this falls through John.
cheapcherokee93
<----boat-manche
- Location
- Guadalahabra, CA
i may have a lead on some more locally, but you do have a good deal there JohnX
casual
NAXJA Forum User
- Location
- high dezert
Johnnie I have a D30 out of a 96...not alxes or anything but its a good housing with knuckles...
JohnX
Sarge
- Location
- Williams AZ
Mines a LP d30, good for the parts only. Would be perfect for brakes and knuckles. 
cheapcherokee93
<----boat-manche
- Location
- Guadalahabra, CA
where are you located 90XJLtd? if your in san diego like your location states then thats probably too far for me.
JohnX- if they're from a LP then that means the rotors and unit bearings were from a 99.5-01, which won't work with my unit bearings, which are from a 98. http://www.naxja.org/forum/showpost.php?p=245269210&postcount=22
but it looks like i can still use the knuckles and calipers, so i may still be interested.
JohnX- if they're from a LP then that means the rotors and unit bearings were from a 99.5-01, which won't work with my unit bearings, which are from a 98. http://www.naxja.org/forum/showpost.php?p=245269210&postcount=22
but it looks like i can still use the knuckles and calipers, so i may still be interested.
JohnX
Sarge
- Location
- Williams AZ
10-4, rotors would not work, all else should.
