- Location
- Michigan
I've got a warn hs9500i, its about 10 years old.
It doesn't seem to pull like it used to.
Why?
It doesn't seem to pull like it used to.
Why?
warn winch
- Thread starter Fore Wheeler
- Start date
r33pwrd
NAXJA Forum User
- Location
- Sammamish WA USA
It's broke?
- Location
- Columbus, In
Does it have cable on it?
- Location
- Southwest IN
It lost some power when the cable burnt Brendan's neck?
corroded/oxidized electrical connections inside the solenoid housing/solenoids themselves.
Worn brushed/dirty contacts in the motor.
would be the first two things I would suspect. You'd notice if a hard part was bad, but electrical degradation would have been gradual and slow, not something you'd notice all at once.
come to the crawl and I'll take it apart and clean it for you
Worn brushed/dirty contacts in the motor.
would be the first two things I would suspect. You'd notice if a hard part was bad, but electrical degradation would have been gradual and slow, not something you'd notice all at once.
come to the crawl and I'll take it apart and clean it for you
- Location
- Columbus, In
:roflmao:
- Location
- Michigan
I was thinking a good cleaning may be needed.
It has been gradual. I may fix the brake while I'm in it
I use rope. You may have noticed the rope burns on Brenden's neck? Good call Byron.
It has been gradual. I may fix the brake while I'm in it
I use rope. You may have noticed the rope burns on Brenden's neck? Good call Byron.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
You probably use it to much........need to learn how to drive.
- Location
- Michigan
I LOLed. ^
Rev Den
NAXJA Forum User
- Location
- Plainfield, IL
Current is your buddy on a electric winch.
Check...
Solenoids
Battery Connections
Connections to motor
Connections to solenoids
Every thing needs to be clean and shiny, dirt, corrosion, pitting, and tarnish will affect the ability to transfer current to the motor.
Rev
Check...
Solenoids
Battery Connections
Connections to motor
Connections to solenoids
Every thing needs to be clean and shiny, dirt, corrosion, pitting, and tarnish will affect the ability to transfer current to the motor.
Rev
Similar threads
