MountainRhino
NAXJA Forum User
- Location
- Harrisonburg, Va
Has anyone done this? would like to examine different methods. I though of splitting the wall of the underseat area in the center and folding some portion to crate a box on each side. adding material where need to complete said box, then of course seat tracks and seats.
my original intent is geared towards an open center once I perform a chop of the rear quarter area of the roof and glass. Going to acquire an MJ for the tops of the bedsides, taillight section and tailgate. use the rear wall of the cab to complete the smooth look of the corners, while removing the glass and the walled part. open body with the rounded edges at the cut. YJ/TJ sport roll bar. had one and sold it during tougher times
my original intent is geared towards an open center once I perform a chop of the rear quarter area of the roof and glass. Going to acquire an MJ for the tops of the bedsides, taillight section and tailgate. use the rear wall of the cab to complete the smooth look of the corners, while removing the glass and the walled part. open body with the rounded edges at the cut. YJ/TJ sport roll bar. had one and sold it during tougher times