Spacer ?'s

[Whiplash_Syndicate]

Hey guys Me and a buddy bastard packed a set of rear springs i had and got around 2-3 inches of lift which is all i want for now and was wondering about spacers for the front.I wanted to see if anyone had used the 3 inch and how they were or should i go with 2 inch to keep problems to a minimum.

 

[Timmy2XJS]

i run 2 inch spacers on top of my coils with shackles out back i dont iv heard of 3 in ones up front so some 2 inchers should be fine for ya

and in most cases the back will settle and you "should" be level lol

 

[jeepgeek2002]

i run a 3" metal post with a lip on both ends..
Fat Bobs on Ebay sells 3" spacers ...

Mark

 

[Whiplash_Syndicate]

I looked a little closer at the 3 inch and its a 2 inch and 1 inch stacked together so i went with the 2 inch should be here by the end of the week.I ordered the 2 inch kit with shackles cause after some driving around last night the rear is a little stiff for my taste so may go with shackles instead.

 

[jeepgeek2002]

i got a 2" block and 1" teraflex shackle rear..
with stock springs.. rides nice still..

mark

 

[Whiplash_Syndicate]

Well got it put on in 4.5 hours but was wondering about the track bar. Do I just drill a new hole and move over or is an adj. one worth the money?

 

[jeepgeek2002]

i think RC says to drill a hole ..but truely.. get an adjustable trackbar.. its easier to adjust and makes alignment so much easier..
RC makes some cheap ones.. Im a big RE fan..

Mark

 

[Whiplash_Syndicate]

We drilled the hole for now need the jeep this weekend it has really bad bump-steer.