Some XJ goodies

[Outlander560]

-VERY good OEM 01 Jeep cherokee steering box. Will include pump (needs new pulley) The box had no slop in it what so ever hard to believe I know was tempted to keep it but I got a great deal on PSC steering system. -$120 with pump and high pressure line.

-Currie currectlynk steering inverted Y for XJ TJ MJ has 2 newish tie rod ends. $200

-PSC 1.25 ram coupler. Brand new never installed. They go for 75 new not including shipping. Will sell for 60 plus shipping

-Rear chrysler 8.25 axle shafts both driver and passenger 29 spline -$95

-Warn 8000lb winch and controller. Recently rebuilt, sealed, greased, painted and new factory warn stickers installed. Winch line not included. Asking $260

-More stuff will be added as well. Do have 4.6 and 4.7 stroker parts if anyone is interested all brand new in boxes

 

[Outlander560]

Have a pair of Bilstein 5100 for a 4" lift will get extended and collapsed length for any interested. Will have a matching front pair shortly.

 

[foxwar71]

-More stuff will be added as well. Do have 4.6 and 4.7 stroker parts if anyone is interested all brand new in boxes

Tell me more....

 

[Biscuits]

Have a pair of Bilstein 5100 for a 4" lift will get extended and collapsed length for any interested. Will have a matching front pair shortly.

Any other lift parts going to be available?

 

[Outlander560]

Any other lift parts going to be available?

I have a pair of clayton 4.5 leaf springs. One leaf needs a new main leaf other than that good to go. Make an offer if interested not looking for much for them. Have a pair of 4.5 coils as well somewhere need to find them

 

[Outlander560]

Tell me more....

These are all COMP Cams BNIB
COMP Cams (68-232-4)
Cam Specs INT and EXH
ADV: 250 256
DUR @.050 206 212
Valve Lift: .462 .478

LOBE Sep 113.0



Spring Retainers 3/8" 1.437" PN# 744-12

ARP head Studs

Comp cams valve locks 1/8" single groove BNIB PN: 603-12

Comp Cams Pro-mag hydraulic lifters PN 867-12 New in box

Comp cams valve springs 926-12 BNIB

 

[Outlander560]

Will be at AOAA meet April 15th weekend I can bring anything down

 

[Outlander560]

DIY track bar kit brand new PSC kit

 

[MrSimon]

What brand are the 4.5 coils, and how long have they been used. How much you want for them.

I'll be at the AOAA run too.

 

[Nealio240z]

These are all COMP Cams BNIB
COMP Cams (68-232-4)
Cam Specs INT and EXH
ADV: 250 256
DUR @.050 206 212
Valve Lift: .462 .478

LOBE Sep 113.0



Spring Retainers 3/8" 1.437" PN# 744-12

ARP head Studs

Comp cams valve locks 1/8" single groove BNIB PN: 603-12

Comp Cams Pro-mag hydraulic lifters PN 867-12 New in box

Comp cams valve springs 926-12 BNIB

Price for these goodies? Im building 4.7 as we speak :laugh3:

 

[Outlander560]

What brand are the 4.5 coils, and how long have they been used. How much you want for them.

I'll be at the AOAA run too.

The coils are skyjacker I believe. They were only on for a roller. Never wheeled. $35 sound fair?

Nealio I pm'd you

 

[Outlander560]

Typo on the coils supposed to be 55 not 35.

 

[MrSimon]

Typo on the coils supposed to be 55 not 35.

LoL! Still a decent price, but Skyjacker coils are too stiff for my liking. Thanks though.

 

[Outlander560]

Yea haha that was an oops. No problemo. See you at AOAA

 

[Skorpyo]

Bummer you're so far. Would you ship? Interested in the currectlynk steering. Is it the drag link and tie rod?

 

[Outlander560]

Yea I'd consider shipping. It is the complete setup minus the stabilizer mount. Which can be added 2 u-bolts and a plate with a stud

 

[Skorpyo]

How much shipped to 22193? Thanks

 

[MrSimon]

If shipping doesn't work out, I could pick it up from him at AOAA in a few weeks and at least get it down here to SE PA ..... if that helps.

 

[Skorpyo]

Thanks! I wasn't going to ask but that might work if shipping is too much. I'll see you at NACfest at least. Thanks for the offer if needed.

 

[Outlander560]

Have boost works np231 shift linkage up for grabs $20 plus shipping never installed