RRO, AJ or Custom 4x4 fabrication rockrails owners in the SF south bay area.

[Slonopotam]

This is what happens with sliders bolted to the frame and the pinch seem (RRO):

Well, I ordered RRO 1 minute ago.
Anyway, how else would you mount it ?

 

[Jes]

Well, I ordered RRO 1 minute ago.
Anyway, how else would you mount it ?

The trick is to have a design that runs a full length tube under the rocker panel at the pinch seam so it spreads the load(like JKS Supernerfs). If you just have stanchions under there it concentrates the load to them and crushes the rocker panel.
Here's Bryan C.'s C4X4 rails...

 

[Letterman]

or cut into the body, like Wit's

Cut into the body and doors like Kernel:

All kinds of extra room!

 

[Slonopotam]

The trick is to have a design that runs a full length tube under the rocker panel at the pinch seam so it spreads the load(like JKS Supernerfs).

Judging by the pictures, RRO has a tube by the pinch weld. It's not as big as JKS though.

Andrey

 

[Matt98XJ]

These are the AJ's Super Rails 3/16, They mount two times on the frame rail and then run along the pinch seam. Let me know if you need more.

Is it safe to run those drop brackets without the braces?

 

[jagger]

Is it safe to run those drop brackets without the braces?

No, but those pics were mid-install, they are in now.