BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
Ok so I decided that it is time for an official build thread for my MJ. This is how it started.
I bought a 1990 Jeep Comanche. 4.0 ax15 swb and bucket seats with 150k for a Daily driver 6 years ago. It had a dented front fender and a bend control arm and I paid $250
A couple years later It gota lumber rack and some flat black paint.
Then after a lesson learned the hard way I started over. I have no pictures until it got the 60 rear and spring over.
Then after taking a welding class and buying a $50 welder I started the front end by building a cross member.
made some heim joint / DOM steering
Did some plating
Changed the nose
Build some radius arms

I bought a 1990 Jeep Comanche. 4.0 ax15 swb and bucket seats with 150k for a Daily driver 6 years ago. It had a dented front fender and a bend control arm and I paid $250
A couple years later It gota lumber rack and some flat black paint.

Then after a lesson learned the hard way I started over. I have no pictures until it got the 60 rear and spring over.

Then after taking a welding class and buying a $50 welder I started the front end by building a cross member.

made some heim joint / DOM steering

Did some plating

Changed the nose

Build some radius arms
