I had this idea the other day and wanted to see what ya'll thought of it before I tried it. I've got an 89 with a 4.5” rustys lift, and then shackles in the rear and spacers in the front to make it a 6” lift. I've got some probably with the camber being off, i've got adj upper control arms but my lower ones are non adj. I was told i need to kick the bottom of the axle out to take the bend out of my coil springs. They bow towards the front. I also have some trouble with the sway bar hittin the spring So my idea was to take the 1.5” spacer out from the front end and drop it down to 4.5”. Is that going to cause me any trouble? Besides lookin kinda goofy ?