Vanimal
NAXJA Forum User
- Location
- escondido, ca
i currently have rubicon express (i think) radius arms. i am planning on going to a 3 link with the new front axle. i run it wristed right how anyways. i could change the radius arms into lower control arms pretty easily.
My question is if there is any advantage of having 36" arms over something closer to 30". i was thinking of cutting them down a little since i get hung up on the control arm brackets quite a bit. am i going to have any noticeable downsides to doing this? weird handling? difficulty mounting the upper arm while keeping it an ideal length? i cant imagine much of a loss, but i figured i'd ask.
setup is about 4.5-5" lift, 35's, wishbone 3 link rear, radius arms front, coilovers all around.
My question is if there is any advantage of having 36" arms over something closer to 30". i was thinking of cutting them down a little since i get hung up on the control arm brackets quite a bit. am i going to have any noticeable downsides to doing this? weird handling? difficulty mounting the upper arm while keeping it an ideal length? i cant imagine much of a loss, but i figured i'd ask.
setup is about 4.5-5" lift, 35's, wishbone 3 link rear, radius arms front, coilovers all around.