Okay, I got there and realized that it was a 2001 WJ with a dana 30 in the front and a dana 35 in the rear. It has the teves calipers, so I decided to strip all brake parts from the wheels I have everything that I need except for the right front knuckle, the nut spins the stud in the balljoint, any ideas? I beat/banged/sawed until me and the two 18v sawzall batteries that I had were dead. I have a '97 XJ with the dana 30 in the front and an Chrysler 8.25 in the rear. I figure even using the teves calipers that it would be worth the swap for a little while until I found the akebono calipers then I would only have to change the calipers, pads,and the rotors. I also got the tie rod and the drag link, these things are HUGE, I like it
I know the mods that I will have to do to make the front brakes work, but what about the rears? I really want rear discs and I already have the majority of the parts (calipers, mounting brackets, and backing plates). I know most folks use the zj dana 35 stuff on their 8.25, but what about the wj? I have looked all the parts up they are different, but still very similiar... Please tell me how to make this work
Thanks folks