GhostDakota
NAXJA Forum User
- Location
- Phoenixville, PA | Bethany, DE
Selling the HP30 out of my XJ. It's got 3.55's and IS a vacuum disconnect. It's from an older XJ, not originally mine. Unsure of mileage.
One hub assembly was replaced roughly 5k miles ago. Other one seems fine. I can include the rotors if needed which don't seem warped and stop me fine. Ball joints were all replaced back in summer. One of the boots is missing.
The bad: It's a vacuum disconnect. My vacuum lines went bad so we took an old cable lock and fixed it to keep the shift fork in place. Works sometimes lol. You can rig it better or run your factory setup. The driver side u-joint could be replaced, I'll give you one for free if you buy the axle.
It is currently located in West Chester, PA, but I may move it to my shore house in NJ this weekend as I have no room here.
Make an offer.
One hub assembly was replaced roughly 5k miles ago. Other one seems fine. I can include the rotors if needed which don't seem warped and stop me fine. Ball joints were all replaced back in summer. One of the boots is missing.
The bad: It's a vacuum disconnect. My vacuum lines went bad so we took an old cable lock and fixed it to keep the shift fork in place. Works sometimes lol. You can rig it better or run your factory setup. The driver side u-joint could be replaced, I'll give you one for free if you buy the axle.
It is currently located in West Chester, PA, but I may move it to my shore house in NJ this weekend as I have no room here.
Make an offer.
Last edited: