• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Frame Stiffner for Full Traction Lift Help

chris420

NAXJA Forum User
Location
California
Hey Guys,

I want to build a frame stiffner out of tubing that connects the three bolts on the lower controll mount to the rear shackle box. I am looking for suggestions, ideas and design that works. I do not want to box the rails of the unibody. The last rubicon run put creases in the rear pannels by the windows and the doors wont shut or line up now. Need to turn this thing into the Hulk.
 
Hey Guys,

Need to turn this thing into the Hulk.

The way to do that is to box the rails of the unibody. ;)


It sounds like you want to knock off the T&J frame stiffener, but even that comes with a plate to box the frame now..
 
The only real way is a cage, but I'd recommend starting with the T&J stiffeners, which are what you described.
 
Back
Top