F/S 2000 XJ rolling chassis

[KPTHEMP]

up for grabs, heres the left overs from my project jeep, its basically a stripped down 2000 XJ Sport rolling chassis, it would make a nice trail rig or DD if you put some time into it, or swap your drivetrain in an wheel it like it is, i could see this lasting another 5 years in its current condition or longer with some TLC.

includes:
-all glass
-all lights head, tail, turn, markers
-all doors /sheetmetal, hatch
-header panel complete
-fenders
-bodytrim, mouldings,flares, bumpers
-sitting on a 2wd axle tube for front
-all wiring intact
-stripped dash but gauge cluster, heater hvac system and all wiring still there
-fuel tank and sending unit

the good:
-2009 paint job
-2009 windshield
-doors function properly

the bad:
-rust, mostly underside surface rust around the joints of the sheet metal, not really rusted through any where, one spot about the size of a quarter is thin in the rear frame rail but could be fixed easy, i just dont have the time to be dealing with it

-also the lower outside of the rocker could use replacing or rock rails, starting to rust out, but only along the bottom, near the rear doors

I don't want to part it out, I dont have the time.

will post a pic tonite

$600 obo, also trade for lift, wheels, or other goodies

KP

 

[KPTHEMP]

heres the pics:

as it sits now...

and heres basically what ya get (minus roof rack, mirrors and these wheels)

KP atriot:

 

[MELKORsXJ]

Any drivetrain parts?
What about the interior? Anything missing?

 

[KPTHEMP]

Any drivetrain parts?
What about the interior? Anything missing?

no i dont really have any drivetrain, but i could throw in a 8.25 with 3.07 gears and 108kmi,

interior is gutted but i do have all the parts from another XJ to make the dash look nice again

also i will throw in a ton of extra stock parts i have sitting in storage

KP atriot:

 

[Hexfactor]

Could you throw up a few more pics/condition of both front fenders and all 4 doors? Hows the interior? Are the doors manual windows or electrical?
thanks!

 

[kf_chris]

Hey man...are you willing to just sell the pass side headlight cowl? I need one

 

[userbmx1315]

wish you wasnt that far. i'd like a new project.

 

[MTBracer367]

damnit damnit damnit this is exactly what i'm looking for i just rolled my 98 that has a whole new drivetrain and whole new interior in it but i'm in PA and your in TN damnit lol i really gotta see if i couldn't figure out a way to get down there for that.

if you have any suggestions feel free to PM me maybe just maybe i could work something out with you

i'm willing to drive if i can find a tow rig

thanks,
-Dylan_

EDIT: i just remembered i have a friend stationed at fort cambell your gonna have a PM

 

[KPTHEMP]

Re: F/S 2000 XJ rolling chassis + Extras

i did take more pics, ill post them up tomorrow...



Not interested in parting, im moving in the fall and need to liquidate everything,

Im gonna up the ante a little and include all the following for $750 (minus the parts im selling at the M&G):

for 97-01 XJ:

-2wd aw4 transmission 60kmi from a 99
-98 chrysler 8.25 rear with 107 kmi (3.07 gears)
-99 chrysler 8.25 with with 60 kmi (3.55 gears)
-98 intake manifold, computer, wiring
-99 comp and wiring
-231 shifter bezel
-auto trans shifter bezel
-Fog light switch, defrost switch, rear wiper switch and some wiring
-grab handles (medium grey)
-sunvisors without mirror (medium grey)
-battery tray w/ sensor A+ condition
-radio/HVAC bezel
-231 shift decal (the one from headliner)
-rear soundbar speakers and covers (medium grey)
-front license plate holder (x2)
-rear bumper endcaps black
-front wiper arms
-front pass side power door lock and outer handle
-02 sensor, 4wire with black connector
-front door speakers
-231 shift linkage
-front door triangle trim (x2)
-rear driveshaft #52098732 (auto trans 4wd ?)
-98 owners manual (x2)
-98 light grey seats front 2 and rear bench cloth/sport
-radiator, manual trans
-a/c condensor (x2)
-98 rear doors with manual windows
-electric rad fan (2000 XJ)

other XJ parts:

-94 intake manifold
-towhooks pair (no brackets)
-94 header panel
-shock boots, blue (x4)
-stock track bar
-stock leaf springs
-stock coil springs
-rear shocks monroe, stock height new in box (x2)
-8.25 u-bolts regular
-8.25 u-bolts extended
-ubolt plates (x4)
-ZJ sunvisors from a limited with homelink on driver side
-misc exhaust systems, cat, header, tailpipe
-2 good windshields

so thats 1 mostly good 2000 shell, plus 2 more XJ bodies (damaged), all together its enough to build a complete jeep, just need to get a long block or 1 complete 2wd jeep plus 1 buggy

make an offer, let me know
KP atriot:

 

[Eddy_AL]

Need to get this down to the guys at RockSolid OR. Tyler needs this for developing his bumpers, etc. He's in Chattanooga. You might be able to work out a deal for some fab work..... Just an idea....

 

[KPTHEMP]

Pics of its current condition:

 

[KPTHEMP]

any offers ?

I promise you wont hurt my feelings, I need it gone, I can't take it with me

Must sell !

Thanks,
KP

 

[KPTHEMP]

SOLD !

thanks for looking

KP atriot: