npawar1206
NAXJA Forum User
Hi folks (2000 XJ, 4.0 i6, NP241J, Dana 30 front, Dana 44 rear, 35s, 212k miles)
I'm looking at doing a full rebuild on my front and rear driveshafts. Was originally just going to do just U joints, but after reading this thread, I decided I should do centering yokes while i'm at it.
Is this part count and list correct?
Front Driveshaft:
Rear Driveshaft:
Do I also need (2) DNA 2-86-418 Slingers (seal things at the centering yoke)? https://www.dennysdriveshaft.com/p5..._rubber_boot_for_oem_non_greaseable_cv_c.html
Any other parts for maintenance that i'm missing? I"d rather do this once and do this right
I'm looking at doing a full rebuild on my front and rear driveshafts. Was originally just going to do just U joints, but after reading this thread, I decided I should do centering yokes while i'm at it.
Is this part count and list correct?
Front Driveshaft:
- (1) Dana Spicer 211355X Centering Yoke....GREASEABLE
- (3) Dana Spicer 5-153X Universal Joints ...GREASEABLE
- Lube fitting in body
- (4) Grade 8 Bolts
- (1) Spring
(https://www.dennysdriveshaft.com/p2...ft_rebuild_kit_1310_series_greaseable_ce.html)
Rear Driveshaft:
- (1) Dana Spicer 211355X Centering Yoke....GREASEABLE
- (2) Dana Spicer 5-153X Universal Joints ...GREASEABLE
- (4) Grade 8 Bolts
- (1) Spring
(https://www.dennysdriveshaft.com/p2...ft_rebuild_kit_1310_series_greaseable_ce.html)
Do I also need (2) DNA 2-86-418 Slingers (seal things at the centering yoke)? https://www.dennysdriveshaft.com/p5..._rubber_boot_for_oem_non_greaseable_cv_c.html
Any other parts for maintenance that i'm missing? I"d rather do this once and do this right
