1fox2go
NAXJA Forum User
- Location
- Staunton,Virginia
out of an XJ
front-$1400 (have all currie paper work)
3rd member- 9IN, 4.56s, 31 spline, ARB, yoke is 1310
axles- 31 spline chromos with both inner spares and one outer spare(all chromo) warn lockout hubs(at least one spare), disc brakes, 5 on 5.5 bolt pattern
housing- YJ/TJ ends, clayton high clearance brackets( should bolt in XJ TJ ZJ
steering included- DOM chromo tie rode with ton rod ends(need to be replaced(have part #s) ) drag link just reg DOM i think, with high angle ton rod end
mods needed- maybe shorten driveshaft, shorten trac bar
rear-$800
diff- 8.8, stock spline, stock shafts, 4.56s, detroit
axles- stock
housing- M.O.R.E perches, disc brakes, spacers to match the 5 on 5.5 and correct axle width
would take $2000 if purchased as a whole
no trades
pics if asked
Email [email protected] or [email protected]
will deliver within reason from 22980
front-$1400 (have all currie paper work)
3rd member- 9IN, 4.56s, 31 spline, ARB, yoke is 1310
axles- 31 spline chromos with both inner spares and one outer spare(all chromo) warn lockout hubs(at least one spare), disc brakes, 5 on 5.5 bolt pattern
housing- YJ/TJ ends, clayton high clearance brackets( should bolt in XJ TJ ZJ
steering included- DOM chromo tie rode with ton rod ends(need to be replaced(have part #s) ) drag link just reg DOM i think, with high angle ton rod end
mods needed- maybe shorten driveshaft, shorten trac bar
rear-$800
diff- 8.8, stock spline, stock shafts, 4.56s, detroit
axles- stock
housing- M.O.R.E perches, disc brakes, spacers to match the 5 on 5.5 and correct axle width
would take $2000 if purchased as a whole
no trades
pics if asked
Email [email protected] or [email protected]
will deliver within reason from 22980