Started this project with a pretty typical 2000 cherokee sport, 4.0L AW4 NP231. Locked F/R with RK longarm and 6" springs and 35's. Wheeled pretty hard but became clear that once i finished college, got a career and shop, and quit driving it that it would soon get out of control.
Was originally planning on going with 44/60 and 39's, but neh, got a smoking deal on this trailer load
Looked like i was committed now so the torch bottles were filled and this was bought
The reason i call this thing bolt on bruiser is because of the original brackets on the 404's. The majority of my axle mounts are bolted on with 8 5/8's bolts on each corner. Brackets started falling off of the sheet of 1/4"
Was originally planning on going with 44/60 and 39's, but neh, got a smoking deal on this trailer load
Looked like i was committed now so the torch bottles were filled and this was bought
The reason i call this thing bolt on bruiser is because of the original brackets on the 404's. The majority of my axle mounts are bolted on with 8 5/8's bolts on each corner. Brackets started falling off of the sheet of 1/4"