Recent content by xjkid99

grind the head of the bolt down flush with the bracket. Stack washers on the stud then put the nut back on. Wrench on it with a rachet and they will pull right out.

32" MTR's on 3" of lift

I herculinered my rock rails and rocker panels today. Put the second coat on at dusk. Didnt notice till I got in the light but I herculined most of my hands as well. Anyone have a good solvent or cleaner that will remove it?

Searched and didnt find the answer I was looking for. Turn signals do not work, but flashers do. That leads me to believe that its not the relay or the fuse seeing as its a 99 and they share these in common. Tried replacing the turn signal switch and they still dont work. Any ideas? Thanks, Matt

hes crazy 4.11 will be perfect

My buddy had a power-trax and his truck was a donut machine in the snow, spin spin spin

I did the same but I driller mine about 3/4" up and over away from the factory hole. Just make sure you tighten the bolt real tight. Guess mine was too loose I assumed the play in the steering was from having bigger tires but I had my buddy turn the wheel right to left while the truck was...

I ground my studs down on two opposite sides to create a surface to grip with vise grips and it came out no problem. As far as the stripped out bolt hole goes your best bet is probably to drill it out, retap the hole and use a larger bolt. Three bolts should be fine on the street but I...

Ive looked at every kit under the sun and lurked in forums far and wide and this kit is my top pick. I really like the three link design, less to bind and mucho flex. Lots of other companies use the radius arm setups which look kind of sketchy to me. All IMHO

From the research that Ive done it seems all the welding that needs to be done is on the new LCA mounts which actually bolt in place and then are welded on for structural integrity. In therory you can have these welded on at a shop, drive home and put the remainder of the lift in youself which...

thats why all the smart people hang out here

Its cheaper, taller AND it comes with shocks. Cant beat that with a stick. The 6.5" RK la kit is on my to do list.

Yeah!! Thanks for the inspiration!! I still cant seem to find a switch panel I like other than yours though.

I would but I have a 99

Well heres my latest "Im bored on a Sunday" project. Stole this Idea off another post here but organized it a little differently. Its not done but you will get the general idea. The whole box is getting tucked under the passenger seat. BTW this all spawned fom me getting new fog lamps and...