Recent content by XJ91

Had to fix the pic... :sunshine:

Here is what it looks like..

A while back I invested in "Lug Nut Remover Socket Set." http://www.autopart.com/TOOLS/TOOLSMAIN/tool/T_A155.htm Beat the $100 labour costs the local shop wanted.

I've had what sounds to be the same noise from the rear passenger side. The quick bounce was actually making the leafs catch on the muffler/tailpipe hanger and when it let go I heard the bang sound. Check to see if you can notice scrape marks along the exhaust pipe around the leaf area.

Yea, Your lift will be closer to 5". I've had mine on since July and it hasen't settled a bit yet.

I put that exact kit in my 91 and fabbed my own 3/4" TC Drop. Without degree shims I do have vibes.

I need to return my XJ back to stock, would I be OK to use Stock TJ Front Coils? I got them for nothing and for me to get stock XJ coils it's a 3-4 rushhour drive. Has anyboy done this before?

From the top??? When I replaced mine last spring I could not for the life of me get it out from the top. I did how ever get it out from below with very little effort.

Jeff, Even though it just happend to be one of the coldest nights so far -18*C, things just might need to thaw out a bit. In TO it's nice and sunny hopefully in Stoney you've got the same weather. I'm sure you will be giving it a go after work. Maybe by then things will be better. Have ya looked...

Not Listed Here. You just might be out of luck, unless you find them in some scrap yard.

Appreaciated.. :) But here in Ontario, Canada to pass safety it needs to have a e-brake. I will have to keep my eys open for a ZJ disk setup.

ThanX for the referal motorman :) I've PM'ed for info.

What do you do in the extream case of dead battery? Or engine won't crank? I think the CO2 is the way to go.

Good point. Never crossed my mind. Here in Ontario, I would also need an ebrake to pass saftey. Looks like I can't do this on the cheap side. ThanX

I've probably read through most of the write ups on the web. Still looking for info on D30 disks to a D35????