Recent content by xj-sparky

yep, there it is. im a moron. thanks

i've been through tons of threads on the map sensor.....but don't know where it is. i need a picture or something. 1994 I6 4.0L. its running like crap and would like to fix it. thanks in advance

there was a factory IR sensor that worked perfect before, i wired the original IR sensor into the new console but it didn't work. does anyone know if that sensors needs a ground or hot run to it. there are only 4 wires in the harness at the passenger foot. i just wired those up in the console...

make it short, i put an overhead console from a 19?? xj into my '94. worked through the lights and temp/compass. at the same time i was working with some power window problems. i must have screwed something up while working with the windows because now my power locks don't work. when i use the...

spent most of the beginning of the year getting everything on the outside of the jeep up to par and would now like to get into the heart of the beast. its the second I6 for this rig. first one croked at 150k and had another put in(65k on this one) it was before i did much work on the jeep myself...

as far as the height thing, i took measurements off my front and rear bumpers as it sat before the build and measured after. not sure if there might be a better point to measure from to get a definite height over stock. (now im curious to see what i actually have) also i don't really understand...

thanks for all the comments on the build. at any point that i attached new brackets to the "frame" i wrapped it with 3/16" steel to add some strength. the top coilover mount is attached in single shear, that's probably the point that makes me the most nervous as that takes all of the force on...

started by picking up a '79 f-150, that night we pulled the engine tranny and entire rear end, the following night the front suspension and other other components and pieces i would use was pulled off and the rest was taken to the scrap yard. for the next couple weeks wire brushed EVERY piece...

i've got TONS of pix of the build, everything from cleaning the old parts to fabbing the new stuff. every bar and bracket was fabbed and welded in the shop so if you wanna see anything specific just ask and i may have a pic

i've got some pictures on photobucket so how do i get them up on here?

[/IMG]

well 11 1/2" really

decided to really build the jeep up at the beginning of '08, started in about february and slowly worked my way to finish last month. i did a pretty basic high pinion 44 and ford 9" swap but other than most people i spent the extra money to have the axles narrowed. it's a pretty basic custom...