• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by Widmayer123

  1. W

    8.25 Axle Growl??

    Finished!! Replaced All bearings And new Ring and pinion. Now it is Silent!!! Thanks to all for the advice!!
  2. W

    8.25 Axle Growl??

    There was No preload on the Pinoin. So I'm replacing Everything.
  3. W

    8.25 Axle Growl??

    T case is not leaking, No play in the yoke. I am going to re do the Rear end and go from there.
  4. W

    8.25 Axle Growl??

    Doing that will not tell me if the Output Gearing in the Tcase are bad. They will have no load.
  5. W

    8.25 Axle Growl??

    I already have a new Ring and pinion, And all new bearings. I'm a Gm guy and I've never had a Gm Axle make noise with so little play. I'm just worried there is something wrong with my Tcase.
  6. W

    8.25 Axle Growl??

    yes the nut is tight. Can that little play cause a Major growl??
  7. W

    8.25 Axle Growl??

    No shavings. Bearings all feel fine??? But the pinion has .010 side play and no pre load.
  8. W

    8.25 Axle Growl??

    So i pulled the Whole thing apart and found Nothing Wrong, Anybody Had this Happen?? Did you find a problem? Any help would be great
  9. W

    Lockrite Removal

    That was the next Step!!!
  10. W

    Lockrite Removal

    Got it=== Had to cut the C clip!!
  11. W

    Lockrite Removal

    The C clip is Bent somehow :cry: . Still trying to get them Out!!!
  12. W

    Lockrite Removal

    Found the problem, There is a C clip that must be removed first, And its being a MOFO!!!!
  13. W

    Lockrite Removal

    Thanks, I'll Give it a Go.
  14. W

    Stupid Axle Question

    So how do I tell What Rear Axle I have ?? 99 Cherokee Chrystler 8.25? Or Model 35?
  15. W

    Lockrite Removal

    My 99 Cherokee Came with A lockrite in the rear, And it is FUBAR. How the hell do you get these things out? All I can get out id the cross pin and springs. Do the 4 pins come all the way out? Any help would be great.
Back
Top