Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Some links:
http://www.summitracing.com/parts/PLT-PL-RY1
http://www.amazon.com/Pilot-PL-RY1-Auxiliary-Lighting-Accessory/dp/B000BL2Z3I/ref=sr_1_1?s=automotive&ie=UTF8&qid=1338240640&sr=1-1
Yes, someone else linked it here. It's the same relay used for 2003-2008 Honda Pilot Fog lamps.
If you want to replace these relays, search for:
Pilot PL-RY1
You can get them at a lot of places for as low as $5 each.
This has been such a pain in the ass to source, I'm going to replace...
You don't need any new bulbs to start with. The stock lighting harness sucks goat balls.
What you need to start with is a new light harness. Get one from Troy AKA Yellaheep. His is plug and play, no splicing required, it taps into one headlight connector for the signal, everything else is...
The problem is not so much the shroud, really. The bolts that come up from the under the rad cross member are short to begin with. I barely had enough threads to put the nuts on without the shroud when I replaced the rad. Those bolts are parts of the little rubber pads that sit on the rad...
^^^ Thanks for the pics. That was the next step, if the clamps couldn't do the job, obviously.
Finalized the install, no leaks, ran it to temp, and verified that the controller (and wiring) worked. When the first relay kicked off, checked the oh-so-accurate gauge to see what it read: good...
Currently replacing the water pump on a ZJ 4.0 and noticed that the clutch is a lot "stiffer" than the fan I just took off an XJ.
Anybody know if the ZJ fan clutch is supposed to be stiffer or is it just busted? (The ZJ only has the one mechanical fan, and no electric aux fan).
I was gonna...
Seems I've come across another issue. Finalizing the install, (yeah, I know I'm slow): the controller that is to be installed in the top line for the heater core is seriously mismatched to the hose size in my '99.
The fitting is way too small, like a hotdog in a hallway too small. The...
There is in his, but in my '99 with a CSF 3 core, there's only 1/4"-1/2" clearance between the pass side fan and the mech fan pulley.
Also, the bottom edge of the shroud hits the steering housing bolt (on top) and won't go all the way down. I could have notched it but ended up hammering the top...