Recent content by THRASHER

i have a bunch...

i have an 87 with the 4.0/aw4. it will idle for about 20min or drive for about 5 at low speeds before it boils over out the overflow and blows the cap off of it, I have... wired the fan to a relay, its always on if ignition is on drained the radiator and ran water through till it was clear, no...

I have a 98 with a bodylift and and the 3in rancho also. I am not a fan of bodylifts, but the dakota shows almost no frame, and with a bodylift, shows less frame than on a stock chevy...I will get some pics of mine up to give you an idea.

check out this link http://www.pirate4x4.com/forum/showthread.php?t=168280&highlight=TOTW

what are your shackle hangers attatched to?

I got my front axle on the new jeep last night...still need to hook up the steering and brake lines, really need to do some trimming also, here are some pics, used a c-rok bumper mount kit/some .25in to make the crossmemeber Kevin

I am going to run 44044's on the xj I am building up now, for those who are running these springs up front, are you taking any leafs out of the pack? I was running stock waggys w/ and got around 7in, am hoping for around 9in with the 44044's, but would like them to flex as much as possible Kevin

just got an 89 xj with an 4.0/aw4/231/dana 44 for $480. It made the 1.5hr drive home fine, but there is an issue with the tranny....on accleeration, underload, and during decceleration, tranny shifts fine. While driveing down the road though, around 30mph and on the tranny seems very jumpy like...

I am going to pick up an 89 cherokee tonight. It sounds like the tps isnt adjusted right so I am going to take my meter along and check it out before I try to drive it. I am away at school without my tools. Anybody know what size the torx are that hold on the tps so I can adjust it, I dont want...

Here are a few of me from Hollister squeeze rock upper quarry

highway speeds you will break the rear output on the t-case....roomate destroyed his 3rd member on way back from MC a few weeks ago driving up 80 with his trail spare square shaft at 40mhp.... I wouldnt worry about strength, I saw an exo yota on 42's highcenter on the Con and "walk" is truck...

thanks for the info, I am trying to get as much as the prep work done before I leave for school so I can start with tube work during the winter break.... I am also trying to find info on narrowing the front, I am moving the batterys to the back where the seats use to be, and I am putting in a...

this pic might give you a better idea of what I am talking about. I need to attach the section of the uni-frame that is closest to the tire back to the floor, and am wondering if anyone has just welded it and had it hold up, it seems like I would need to add some bracing and am looking for some...

rolled my xj last weekend, so I started to cut everything away and I am going to tube it out, this is the most current pic I have of the cutting, the doors and B pillar are gone since the picture.... I trimmed the rear floor flush to the "frame rails", how should I keep the floor from...

I will be off work at 2:30, so anytime after then. Come take all you want, my truck bed is full of parts and the xj has stuff in it to still.....trim is tan.... Kevin