• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by ThinAir

  1. T

    Random voltage spikes & limp mode.

    Welp, things were good for a while but the symptoms are back.
  2. T

    Random voltage spikes & limp mode.

    I think it's repaired. Cleaned all the grounds in the engine compartment. While doing so found the braided ground strap (firewall to engine) was frayed halfway through from rubbing on something. Looks like it was pinched between the firewall and the cable bundle and when I put it in reverse...
  3. T

    Random voltage spikes & limp mode.

    Battery is good and alternator passed test. Had them tested at Advance Auto. On to the next...
  4. T

    Random voltage spikes & limp mode.

    Not yet. Its been a slow go due to my schedule. New battery temp sensor didn't solve it. Taking in the alternator and battery to have tested, hopefully today. We'll see what results we get. Will probably replace the cables as well. I've seen some cable kits online. Any recommendations?
  5. T

    Random voltage spikes & limp mode.

    Bulb is not burnt out. It comes on at startup with all the other gauge lights and goes off with all the others.
  6. T

    Random voltage spikes & limp mode.

    I does self test when I start up.
  7. T

    Random voltage spikes & limp mode.

    No Codes. Replaced the bat temp sensor with new OEM sensor. Still having the problems. I'm pretty convinced this is only happening when put into reverse btw. Next, I will replace the battery cables and clean all the grounds. Ill keep y'all posted as I go.
  8. T

    Random voltage spikes & limp mode.

    The check engine light never comes on. There is no physical sign of a voltage spike, like lights getting brighter, engine surge etc. Its very strange. The voltage meter goes back to normal and then, about half the time, it will do the slow acceleration thing. The cables and connectors are...
  9. T

    Random voltage spikes & limp mode.

    Hello All, I thought I had the problem solved two years ago when I replaced the battery temperature sensor, but the symptoms are back. I will be returning the sensor to Advance tomorrow for a replacement. Maybe the part was was faulty, maybe its something else....dirty grounds? Before I...
Back
Top