Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
So not all 97 xjs have these plugs. I've removed my factory harness that runs to the passenger side fuse box and swapped the one in from the 98 for the plugs, connected everything and still no luck. for some reason my jeep doesn't have any supporting wiring for the overhead console, maybe...
Hey guys so just posting an update, I've ripped most of the dash out on the pass side to make sure I wasn't overlooking the plugs. I have no carpets so its not tucked away under that either.
I'm assuming that plug comes out of the harness that passes through the firewall just above the...
Hey guys I'm looking to swap an overhead console from a 98 into my 97 xj. I've got the console, harness, air temp sensor, and mounting bracket.
My factory harness has the plug in at the front bumper for the air temp and ive connected the plug for the dome lights that work. but ive dropped my...
This is very interesting actually. i have new 4 hole injectors installed so i don't think its them but i do have a faulty check valve in the fuel pump. I've always had to prime it a time or two before starting and never thought anything more of it, just an inconvenience. Ill look more into...
Hey guys I've always had issues with a rough idle upon a cold start and lately ive been trying to track it down and fix it. after a couple seconds it will rev up then smooth out. lately it seems to have been getting worse so i have started replacing sensors due to the age and mileage (400k)...
Hey guys once again my 97 xj has some strange gremlins going on. Its a 97 xj with an ax15. Just finished with floor pans and found out i don't have a working speedo anymore.
I've crawled underneath and checked to see if i melted or cut any wires and every thing looks fine. i just put the...
Hey there guys I just finished rebuilding my 4.0 in my 97 xj and it turns over but wont cough or fire up.
I have just the bare minimum attached right now such as battery and intake manifold / exhaust manifold as well as all sensors but no accessories or rad. I have double checked all grounds...