Recent content by stadlermco

Need at least one leaf spring, but could use a couple spares. Located in Denver area. Pleez help want to wheel this weekend and broke springs last night. thanx mike

I think that I shorted something in the ecu. It got wet when I was towing. There is no pulse at the injectors, but the cam pos sensor is sending one. I'll try to test the pulse on the crank pos sensor. I'm gonna get my hands on a donor ecu and see if that makes a difference. mike

it looked like 270 or so. I thought that if the cps was bad that there wouldn't be any spark? Is there a better way to test it while the engine is cranking. mike

I've posted this before, but got some new info. I had this pos(90 xj 4.0)running around easter and after towing it through a snow storm and power washing it won't start. It will crank just fine, but won't turn over. At first I thought it was spark and replaced the worn dist. cap and got some...

It starts and loafs while spraying the starter fluid. After that it would almost want to catch on a few cyls, but never started. Some people think that it might be a problem with the tps. It's not soaked plugs. mike

One thing that I did think of was that I'm not using the fuel pump relay. I have a fuel cell and wired the pump directly to the ignition wiring. Could it affect the injectors? mike

I changed the plugs, cap and rotor before replacing the distributor. How do you hold the tps open, or do you mean the throttle? Could it be a bad ground somewhere? thanks for the help. mike

I had this pos running around easter and then towed it through a snow storm and now it won't start. I didn't want to have it coated in the mag chloride so I pressure washed it being kinda careful not to directly blast any major electrical components. I have a 90 xj engine and it will crank...

I have a 90 4.0 installed and I'm trying to wire all the ignition wires. What wires come out of the starter solenoid from teh F, I , and G pegs. I believe the wires I have are org/blk, green, and blk/wht. I have all the harness wires attached to the power harness, buit I want to ditch the...