Recent content by Special K

I tracked the wiring down to where it goes under the drivers feet and there was a gap in the wires where some sort of connection used to be. After a few patches I got everything to work except for the left rear window. It worked from the drivers door controls before but doesn't now. Not sure...

So I've done some searching and experimenting and I'm still stumped. I've got a 94 sport 4.0 and the power windows all work from the drivers door control but none from their own door (except driver). Most of the fixes I've found for the child lock were for 97+ and didn't apply here. I did try...

How much affect should ambient temps have on the cooling abilities?

Got both fitted and installed. I'm happy but not overly impressed with the change. They are brighter, but not a bunch. I may add some more later. There are plenty of LED modules available that could be tied into the circuit probably without much hassle. But first I'll take care of other issues...

A few minutes with the dremel and they go in just fine. Turns out its the length of the bulb, not the diameter that is the problem.

Mine gets to just below that line and then I turn off A/C and if it gets to the line I turn on the heater. When I turn the heater on it drops down to just over the 210 mark in a few minutes. My Jeep is new to me but the PO told me he had replaced the radiator less than a year ago and it looks...

These have 9 SMDs and appear to be pretty bright. It should be a big improvement. I noticed the the light will be directed at a rearward angle which I will see if I can change. If this doesn't do all I want I may wire in some led strips in the kick panels or something. I'm not looking for...

I ordered some dome lights for my 94 sport. Part number- Festoon RL4410-NWHP9. They appear to have the correct wire loops on them but are a little larger diameter. This causes them not to fit in the housings properly. I think I can clearance the housings enough to make them fit but before I...

I haven't had any issues with flickr...yet.